Description
🔹 Product Overview
The SELCO S6100.0010 is a SIGMA Series Synchronization and Load Sharing Module designed for generator control and power-management applications. SELCO identifies the S6100 as the S/LS module within the SIGMA generator control and protection system, where it performs synchronization together with active and reactive load sharing functions.
The module monitors the busbar side of the generator system and provides control functions for generator synchronization, frequency stabilization, voltage matching, and load sharing. It is intended for integration with electronic governors and automatic voltage regulators, while manual control can also be implemented through external push buttons.
🔹 Key Features
- SIGMA Series S/LS control module
- Synchronization and load-sharing functions
- Active and reactive load sharing
- Busbar-side measurements
- Frequency and voltage stabilization
- Automatic synchronization
- Voltage matching
- Analog control outputs for speed and voltage
- Interfaces for electronic governors and AVRs
- 24 VDC power supply
- Designed for generator and power-management systems
🔹 Technical Data
| Parameter | Specification |
|---|---|
| Brand | SELCO |
| Model | S6100 |
| Part Number | S6100.0010 |
| Series | SIGMA |
| Product Name | Synchronization & Load Sharing Module |
| Product Type | Generator Control Module |
| Main Function | Synchronization / Active & Reactive Load Sharing |
| Power Supply | 24 VDC |
| Measurement Side | Busbar |
| Control Interfaces | Governor / AVR interfaces |
| Dimensions | Approx. 145 × 190 × 64 mm |
| Weight | Approx. 1.25–2.20 kg depending on configuration/source |
| Operating Temperature | -15°C to +70°C |
| Application | Marine & Industrial Generator Control |
| Condition | Verify according to the listed item condition |
The SELCO SIGMA documentation identifies S6100.0010 specifically as the Synchronization and Load Sharing Module. Published SIGMA documentation specifies a 24 VDC isolated supply and an environmental range of -15°C to +70°C; the dimensions shown in the SIGMA documentation are 145 × 190 × 64 mm.
🔹 System Integration
The S6100 is normally used together with other SIGMA modules. The S6000 handles generator-side measurements and protection, while the S6100 performs synchronization and load-sharing control. Optional user-interface and power-management modules can be integrated into the overall system.
This architecture makes the S6100 useful for multi-generator installations where generators need to synchronize with the bus and then maintain balanced active and reactive power distribution.
🔹 Installation & Maintenance
Before installation, confirm the exact part number S6100.0010 and verify compatibility with the existing SIGMA system. Check the 24 VDC supply, wiring, governor interface, AVR interface, and busbar measurement connections before commissioning.
During maintenance, inspect terminal connections, power-supply stability, synchronization signals, governor/AVR control signals, and load-sharing behavior. If replacing an existing module, record the existing configuration parameters before removing the original unit so that the replacement can be configured consistently.
For generator paralleling applications, synchronization and load-sharing parameters should be verified during commissioning to prevent incorrect breaker-closing conditions or uneven generator loading.
🔹 FAQ
Q1: What is the SELCO S6100.0010?
A: It is a SIGMA Series Synchronization and Load Sharing Module used for generator control and power-management systems.
Q2: What does the S6100 control?
A: Its primary functions include automatic synchronization, frequency and voltage stabilization, voltage matching, and active/reactive load sharing.
Q3: What power supply does the S6100.0010 use?
A: Published SIGMA documentation specifies a 24 VDC supply.
Q4: Can it work with electronic governors?
A: Yes. The S6100 provides interfaces for conventional and electronic governors as well as automatic voltage regulators.
Q5: Is the S6100 suitable for marine generator systems?
A: Yes. The SIGMA system was designed for generator control and protection in marine and land-based generator applications.
Q6: What is the difference between S6000 and S6100?
A: The S6000 is the input/output and generator protection module, while the S6100 is the synchronization and load-sharing module.
Q7: What is the exact part number?
A: The ordering number is S6100.0010. SELCO documentation identifies it as the Synchronization and Load Sharing Module.
🔹 Recommended SELCO Models
- SELCO S6000.0010
- SELCO S6000.0020
- SELCO S6500.0010
- SELCO S6610.0010
- SELCO T4500.0060
- SELCO T4800.0010
- SELCO T4400
- SELCO T4900
- SELCO C6200.0100
- SELCO C6500.0100
The S6000 and S6100 form the core SIGMA generator protection/control architecture, while SELCO’s other controller and synchronization products can serve related generator-control applications.
