Description
Product Technical Parameters
| Feature | Specification |
|---|---|
| Brand | SERVOMEX |
| Model | 831002465 |
| Part Number | 831002465 |
| Device Category | Main Control / CPU Board |
| Signal Input | Digital and Analog interfaces |
| Power Consumption | Low voltage DC (typically 5V/24V) |
| Communication | Proprietary Serial/Bus Interface |
| Processor Type | Embedded Microcontroller |
Product Datasheet
| Attribute | Details |
|---|---|
| Dimensions | 15.5 cm x 11.2 cm x 1.8 cm |
| Weight | 0.32 kg (approx. 0.70 lbs) |
| Country of Origin | United Kingdom |
| Operating Temperature | 5°C to 45°C (41°F to 113°F) |
| Storage Humidity | 10% to 90% non-condensing |
| Component Grade | Industrial Grade |
| Mounting Style | Slide-in chassis or standoff mounting |
Application Fields
The 831002465 Control Board is a high-precision component typically found in gas analysis instrumentation. Its primary applications include:
- Gas Analyzers (e.g., Servomex 1800 or 1900 series)
- Process Oxygen Monitoring systems
- Emission Control and Monitoring (CEMS)
- Laboratory-grade atmospheric analysis
- Hazardous area gas detection units
Product Instructions
- ESD Protection: Before handling the 831002465, ensure you are wearing an antistatic wrist strap. Modern control boards are highly sensitive to electrostatic discharge.
- Installation: Power down the analyzer completely. Slide the board into the designated internal slot, ensuring the edge connectors align perfectly with the backplane. Do not force the board; it should seat firmly with moderate pressure.
- Cable Management: Reattach any ribbon cables or multi-pin connectors. Ensure the locking mechanisms on the connectors are engaged to prevent vibration-related signal loss.
- System Initialization: Upon powering up, the board will perform a self-test. Check the analyzer’s display for “Board Detected” or “System Ready” status. You may need to update or synchronize the firmware through the service port.
Product Q&A
Q: What are the symptoms of a faulty 831002465 board? A: Common issues include an unresponsive user interface, “Comm Error” messages on the analyzer display, or erratic readings from the sensors that cannot be corrected by calibration.
Q: Can this board be used across different Servomex models? A: While it is a standard control board for certain series, always verify the specific P/N 831002465 matches your unit’s serial number. Using an incorrect board revision can lead to sensor damage or data inaccuracies.
Q: Is this board field-repairable? A: Generally, no. Most components are surface-mounted (SMT). It is recommended to replace the entire board assembly to ensure the precision and safety of the gas analysis system.
Q: Does the board require software configuration after installation? A: Yes, most control boards require the input of specific calibration coefficients or analyzer-specific parameters stored in the system’s non-volatile memory.
Similar Models Recommendation
- SERVOMEX 831002461
- SERVOMEX 01800931
- SERVOMEX 01900931
- SERVOMEX 831002460
- SERVOMEX 04100931
