Description
Product Overview
The SULZER 112.029.192.200 is an F0 19-inch modular electronic control rack system designed for industrial and marine control applications. The assembly uses a modular architecture with dedicated power, input, logic, display, relay, and dimmer functions.
The system is identified as F0 19 and incorporates an 11–33 VDC input switching-mode regulator that provides a regulated 5 VDC supply. The rack also includes insulated inputs, control logic, display logic, relay/lamp-driver functions, and dimmer outputs, making it suitable for integrated equipment control and monitoring.
This type of modular rack is particularly useful when maintaining legacy Sulzer control systems where individual functional modules need to be retained or replaced without redesigning the complete control architecture.
Key Features
🔹 Sulzer F0 19 modular electronic control rack
🔹 Part number 112.029.192.200
🔹 19-inch modular rack architecture
🔹 11–33 VDC input supply
🔹 5 VDC switching-mode regulated supply
🔹 0–3 A regulated output
🔹 Short-circuit-protected switching regulator
🔹 8 insulated input channels
🔹 Dedicated control and display logic modules
🔹 5-relay lamp-driver section
🔹 Two 1 A dimmer outputs
🔹 Suitable for marine and industrial control-system maintenance
Product Datasheet
| Parameter | Specification |
|---|---|
| Brand | Sulzer |
| Model | F0 19 |
| Part Number | 112.029.192.200 |
| Product Name | Modular Electronic Control Rack System |
| Product Type | 19-Inch Modular Electronic Control Rack |
| Input Voltage | 11–33 VDC |
| Regulated Output | 5 VDC, 0–3 A |
| Functional Modules | Filter/Regulator, Insulated Inputs, Control Logic, Display Logic, Relay/Lamp Driver, Dimmer |
| Condition / Status | Used |
| Weight | Approx. 7.6 kg |
| Country of Origin | Switzerland |
Modular System Architecture
The rack combines several functional sections into a single control-system assembly. The documented configuration includes a filter/regulator, switching-mode regulator, coding-disc input, eight insulated inputs, control logic, display logic, relay/lamp-driver circuitry, and two dimmer outputs.
This modular arrangement allows individual control functions to be organized within a standardized rack structure. It is especially useful for equipment where power distribution, signal processing, status indication, relay control, and operator-display functions are handled within the same control cabinet.
Power Supply & Control Functions
The integrated switching-mode regulator accepts 11–33 VDC and provides a regulated 5 VDC output up to 3 A. The regulator is specified as short-circuit protected, providing the internal low-voltage supply required by the electronic modules.
The rack also incorporates:
- Filter and voltage regulation
- Insulated signal inputs
- Control logic
- Display logic
- Relay and lamp-driver outputs
- Two dimmer channels rated at 1 A
- Internal module interconnection
When replacing the rack, the supply voltage and the installed functional modules should be compared carefully with the original system configuration.
Typical Applications
⚓ Marine Automation
Suitable for legacy shipboard automation, monitoring, and machinery control systems.
🚢 Engine & Auxiliary Machinery
Can be used in control cabinets associated with marine engines and auxiliary equipment.
⚡ Industrial Control
Applicable to industrial equipment requiring modular DC-powered control electronics.
🏭 Control Cabinet Maintenance
Useful as a replacement assembly for existing Sulzer control-system installations.
🔧 Legacy System Support
Provides a practical spare for maintaining older electronic control architectures where original rack configurations remain in service.
Installation & Integration
Before installing the replacement rack:
- Confirm the complete part number 112.029.192.200.
- Check the F0 19 rack configuration and revision marking.
- Verify the incoming DC supply is within the 11–33 VDC range.
- Confirm the polarity and wiring of the power connections.
- Check all plug-in modules for correct position and identification.
- Inspect connectors for oxidation, contamination, or mechanical damage.
- Verify the control and display modules correspond to the original system.
- Check relay and dimmer wiring before applying power.
- Confirm the regulated 5 VDC supply after initial energization.
- Perform functional testing of inputs, outputs, indication, and connected equipment.
Maintenance Recommendations
Regular inspection is recommended for legacy modular control racks, particularly those installed in marine environments.
Check for:
- Loose plug-in modules
- Corroded terminals or connectors
- Overheated components
- Damaged wiring
- Unstable DC input voltage
- Abnormal 5 VDC output
- Relay contact wear
- Dimmer output faults
- Display or indication abnormalities
- Contamination and moisture inside the cabinet
Because the rack contains several independent functional sections, troubleshooting should begin by identifying whether the problem is associated with the power supply, input section, logic section, display section, relay driver, or dimmer output.
Frequently Asked Questions
Q1: What is SULZER 112.029.192.200?
It is an F0 19 modular electronic control rack system used for integrated control and monitoring functions.
Q2: What is the input voltage?
The listed input range is 11–33 VDC.
Q3: What output does the switching regulator provide?
The integrated switching-mode regulator provides 5 VDC with up to 3 A output and is specified as short-circuit protected.
Q4: What modules are included?
The documented configuration includes filter/regulator, switching-mode regulator, insulated inputs, control logic, display logic, a five-relay lamp-driver section, and two 1 A dimmer outputs.
Q5: Is this suitable as a replacement for another Sulzer rack?
Compatibility should be confirmed by comparing the complete part number, rack configuration, revision, installed modules, wiring, and system application before replacement.
Q6: What is the approximate weight?
The listed assembly weight is approximately 7.6 kg.
Related SULZER Models & Components
- SULZER F0 19 Modular Electronic Control Rack
- SULZER 112.029.192.200 Control Rack
- SULZER 112.023.189.200 Filter & Regulator
- SULZER 112.022.190.200A Coding Disc Input Module
- SULZER 112.022.178.200B 8-Input Module
- SULZER 112.022.192.200C Control Logic Module
- SULZER 112.022.194.200 Display Logic Module
- SULZER 112.023.169.200 Relay/Lamp Driver
- SULZER 112.023.169.200A Relay/Lamp Driver
- SULZER 112.021.585.201 Dual Dimmer Module
Spare-Part Recommendation
For legacy Sulzer marine and industrial control systems, keeping the complete 112.029.192.200 F0 19 rack or its individual functional modules as spare parts can simplify maintenance and reduce downtime. Before purchasing a replacement, compare the rack revision, installed modules, connector arrangement, and system wiring with the existing installation.
