Description
Product Introduction
The Techcross CIM-V-2006076 Control Interface Module is an electronic module used in compatible Techcross marine automation equipment. Techcross develops ballast water management systems (BWMS), and its control-system components support communication and coordination between designated equipment assemblies.
The CIM-V-2006076 is identified as a Control Interface Module. Its exact signal assignments, communication interfaces, and control responsibilities should be confirmed using the applicable Techcross system documentation. It is intended for maintenance and replacement applications where the installed equipment requires this specific module.
When sourcing a replacement, verify the complete model number, hardware revision, connector layout, and system configuration. Other Techcross CIM modules may have similar names but are not necessarily interchangeable.
CIM-V-2006076
Key Features
- Manufacturer: Techcross
- Model: CIM-V-2006076
- Product Type: Control Interface Module
- Application: Compatible marine automation and control systems
- System Association: Techcross control equipment; exact system configuration should be verified
- Primary Function: Interface and control-signal handling within the designated equipment
- Maintenance Use: Replacement, repair, and spare-parts inventory
- Compatibility: Requires confirmation of the exact module version and installed system
Product Datasheet
| Parameter | Description |
|---|---|
| Brand | Techcross |
| Model | CIM-V-2006076 |
| Series | CIM Control Interface Module |
| Product Name | Control Interface Module |
| Place of Manufacture / Origin | Not independently verified |
| Product Status | Used; seller describes it as tested and in good condition |
| Dimensions | Not verified |
| Weight | Not verified |
| Country of Origin | Not verified for this specific unit |
| Power Requirements | Confirm from the module label and system documentation |
| Discontinued | Not verified |
Installation and Compatibility Notes
- Confirm the complete model number, CIM-V-2006076, against the installed module.
- Check the hardware revision, connector arrangement, labels, and mounting details before replacement.
- Verify the module’s power requirements, signal interfaces, and communication connections using the relevant Techcross documentation.
- Isolate the equipment and follow electrostatic-discharge precautions when handling the module.
- After installation, perform the required system checks according to the vessel’s maintenance procedures.
- Do not substitute another CIM-series module based on the CIM designation alone; confirm compatibility with the control-system version.
Frequently Asked Questions
Q1: What is the Techcross CIM-V-2006076?
A: It is a Control Interface Module for compatible Techcross marine automation equipment.
Q2: What is its primary function?
A: It provides an interface within the associated control system. The exact signal-processing and communication functions depend on the equipment configuration and should be confirmed from technical documentation.
Q3: Is it used in ballast water management systems?
A: Techcross manufactures ballast water management systems, and its product range includes control interface modules. Confirm that the CIM-V-2006076 matches the specific BWMS installation before ordering.
Q4: Has the listed module been tested?
A: The seller describes the unit as tested and in good condition. Confirm the test scope and warranty or return conditions directly with the seller.
Q5: What are the power requirements?
A: The voltage and current specifications have not been verified. Check the module label and the applicable Techcross manual before connecting power.
Q6: Can another Techcross CIM module replace it?
A: Not automatically. Different CIM models may have different hardware revisions, interfaces, or system functions. Match the full model number and confirm compatibility before installation.
Recommended Related Techcross Models
The following Techcross products are related control-system or ballast water management components. They may be useful for maintenance planning but are not guaranteed direct replacements for the CIM-V-2006076.
- Techcross AIM-V-2006151 — Control Interface Module.
- Techcross CIM-V2302006 — Control Interface Module.
- Techcross CIM-V1907052 — Control Interface Module.
- Techcross CIM-V2106029 — Control Interface Module.
- Techcross BCM-V-2102085 — Ballast Control Management Module.
- Techcross RCU000ACF000Z — Printed Circuit Board.
- Techcross TPC-15 — Control Unit.
- Techcross PRU-1 — Power Rectifier Unit.
- Techcross PRU-4 — Power Rectifier Unit.
- Techcross TCL4ECS — TRO Monitor.
- Techcross ECU Signal Junction Box — Signal connection equipment for a compatible system.
- Techcross ECU-600 — Electro Chamber Unit.
- Techcross CPC Ballast Water Management System — Ballast water management equipment.
- Techcross ESC-RCM — Rectifier Control Module.
- Techcross BWMS Control Components — Related system electronics; select the exact model based on the installed equipment.
Purchasing Reminder
Before ordering, confirm the exact identification Techcross CIM-V-2006076 Control Interface Module. Verify the module label, hardware revision, physical condition, connectors, and compatibility with the existing Techcross system. Confirm the seller’s testing details and return terms before purchase.
