Description
🔹 Product Introduction
The ULSTEIN IND1013-B is a marine electronics PCB associated with Ulstein bow thruster and propulsion control equipment. It is designed for use within marine control and indication systems where accurate operator feedback and control of thruster-related functions are required.
The IND1013-B identification is associated with Ulstein Marine Electronics equipment and has also been documented with the identifiers IND1013, 61310, E204460, and PCB. The board may be found in marine thruster control assemblies and related indication/control equipment.
This board is suitable as a replacement or spare for vessels equipped with the corresponding Ulstein marine propulsion control system. Before installation, verify the PCB identification, revision, connector arrangement, wiring, and the complete control-system configuration.
🔹 Key Features
- Ulstein Marine Electronics control PCB
- IND1013-B identification
- Designed for marine propulsion and thruster systems
- Suitable for bow thruster control applications
- PCB-based electronic control and interface circuitry
- Intended for integration with existing marine control equipment
- Useful for vessel automation maintenance and retrofit projects
- Compact replacement board for existing installations
🔹 Technical Specifications
| Parameter | Specification |
|---|---|
| Brand | ULSTEIN |
| Model | IND1013-B |
| Series / System | Ulstein Marine Electronics |
| Product Name | Bow Thruster Marine Propulsion Control Board |
| Board Type | PCB / Control & Indication Board |
| Part Number | IND1013-B |
| Related PCB Number | 61310 |
| Related Identifier | E204460 |
| Application | Bow Thruster / Marine Propulsion Control |
| System | Marine Thruster Control |
| Revision Marking | 02.12.17 may appear on associated PCB versions |
| Construction | Electronic printed circuit board |
| Country of Origin | Verify from physical unit |
| Condition / Status | Used / Pre-Owned |
| Quantity | 1 Piece |
🔹 Marine Application
The IND1013-B is intended for marine automation environments involving propulsion and thruster control. Bow thrusters are commonly used to provide lateral maneuvering assistance during vessel docking, low-speed navigation, and positioning operations.
Within a compatible Ulstein system, the control board can form part of the electronic interface between operator controls, indication equipment, and the vessel’s thruster control architecture.
The board should therefore be replaced with a matching part number and revision whenever possible. Incorrect substitution may affect signal interfaces, indication functions, or communication with associated marine control equipment.
🔹 Installation & Integration
Before replacing the existing board, record the original board number, revision marking, connector positions, and wiring arrangement.
Confirm that the replacement IND1013-B has the same hardware identification as the original unit. Inspect all connectors for corrosion, contamination, bent pins, or loose contacts before installation.
Marine electrical systems should be isolated according to the vessel’s approved maintenance procedures before removing or installing the PCB. After installation, verify power supply conditions and perform an operational check of the associated thruster control and indication functions.
A functional test should include operator command response, direction indication, feedback signals, alarms, and any associated interlocks required by the vessel’s propulsion-control configuration.
🔹 Maintenance Recommendations
- Inspect the PCB for corrosion, moisture exposure, and damaged components.
- Check connector contacts for oxidation or contamination.
- Inspect solder joints and board terminals for visible damage.
- Keep the electronic enclosure dry and properly ventilated.
- Verify associated wiring before reconnecting the board.
- Record the original PCB revision before replacement.
- Check thruster indication and feedback signals after installation.
- Keep a tested spare PCB available for critical vessel automation systems.
🔹 FAQ
Q1. What is the ULSTEIN IND1013-B?
It is a marine electronic PCB associated with Ulstein propulsion and bow thruster control equipment.
Q2. What is the main application?
The board is used in marine propulsion and thruster-related control or indication systems.
Q3. Is IND1013-B a complete bow thruster controller?
It is identified as a PCB/control board rather than a complete thruster system. The exact function depends on the vessel’s Ulstein control-system configuration.
Q4. Are there other numbers associated with IND1013-B?
Yes. Related identification markings include 61310 and E204460, depending on the board or assembly.
Q5. Can it be used as a direct replacement?
Only after confirming the original board’s part number, revision, connector configuration, and system compatibility.
Q6. Is this item new?
The supplied listing identifies the item as Used / Pre-Owned.
Q7. Is IND1013-B used only for bow thrusters?
IND1013-B is associated with several Ulstein marine electronic assemblies, so the exact application should be confirmed against the vessel’s original equipment configuration.
Q8. What should be checked before installation?
Verify board identification, revision, connectors, wiring, power requirements, and the associated thruster control system.
🔹 Recommended ULSTEIN Models
- ULSTEIN IND1013-B Marine Control PCB
- ULSTEIN IND1013 / 61310 PCB Card
- ULSTEIN E204460 Marine Electronics PCB
- ULSTEIN LF90S-01-06 Level Controller
- ULSTEIN Bow Thruster Control System
- ULSTEIN Marine Propulsion Control Board
- ULSTEIN Thruster Indication Module
- ULSTEIN Marine Electronics Control Module
- ULSTEIN 100-0-100 Pitch Control Equipment
- ULSTEIN Marine Thruster Control Components
🔹 Product Summary
The ULSTEIN IND1013-B is a marine electronics PCB associated with Ulstein bow thruster and propulsion control systems. With related identification numbers including 61310 and E204460, it is a useful replacement or maintenance spare for compatible vessel automation equipment. Proper identification and system compatibility checks are recommended before installation.
