Description
Product Overview
The YAMATAKE-HONEYWELL 80364386-100 is an industrial control unit assembly used in legacy Yamatake-Honeywell automation equipment. The part number is also associated with JS-DNCF02-0 and JS-MLUS40-00 in available product listings, making the exact identification number important when sourcing a replacement.
The supplied listing identifies this unit as a Control Unit Rack with a 100V, 50/60Hz input. The listed unit weight is approximately 19.300 kg, and the country of origin is Japan.
This is a legacy industrial assembly rather than a general-purpose modern PLC rack. For maintenance or system restoration, the complete part number, internal configuration, connectors, installed boards, and revision markings should be checked before installation.
Product Summary
YAMATAKE-HONEYWELL 80364386-100 is intended for use as an industrial control-unit assembly within compatible Yamatake-Honeywell equipment.
Its main value for maintenance teams is direct part-number matching when an original control rack has failed or a spare is required for an existing installation. Because this is an older industrial control platform, replacing it with a visually similar rack without checking the complete part number can result in wiring or system compatibility problems.
Product Datasheet
| Parameter | Specification |
|---|---|
| Brand | YAMATAKE-HONEYWELL |
| Model / MPN | 80364386-100 |
| Product Type | Control Unit Rack / Control Unit Assembly |
| Associated Model | JS-DNCF02-0 / JS-MLUS40-00 |
| Input Voltage | 100V AC |
| Frequency | 50/60Hz |
| Unit Quantity | 1 Pc |
| Listed Weight | 19.300 kg |
| Country of Origin | Japan |
| Application | Industrial automation / control equipment |
| Product Generation | Legacy Yamatake-Honeywell equipment |
| Condition of supplied listing | Used |
The exact number and type of internal boards, terminals, power distribution components, and control functions should be confirmed from the physical unit and system documentation. The available public information does not provide enough evidence to specify these details accurately.
Identification and Related Part Numbers
Several identifiers appear in listings associated with this assembly. The primary purchasing reference should remain 80364386-100.
Related identification found in available product information includes:
- JS-DNCF02-0
- JS-MLUS40-00
- 80364386-100
- 80364391-001
- 80364051-001
- 80364052-100
- 51401582-100
- 51401583-100
- 51402754-100
- 51402755-100
Not every number above represents the complete control rack. Some appear to identify internal assemblies or associated components. They should not be treated as interchangeable replacement numbers without verification.
Main Functions
The 80364386-100 assembly serves as part of the control hardware in compatible Yamatake-Honeywell industrial equipment.
Typical maintenance functions of this type of assembly include:
- Housing and supporting control electronics
- Providing organized electrical interconnection between internal components
- Supporting the system’s control and signal-processing hardware
- Providing the physical interface between internal control assemblies and external wiring
- Maintaining the original equipment architecture during repair or system restoration
The precise control functions depend on the equipment in which the assembly was originally installed.
Installation and Replacement Guide
Before replacing the unit, shut down the associated equipment according to the plant’s approved maintenance procedure and isolate the 100V supply.
Record the existing wiring, connectors, terminal positions, board locations, and identification labels before removing the original assembly. This is particularly important with legacy equipment because documentation and replacement hardware may differ between revisions.
Check the replacement unit carefully for:
- 80364386-100 part number
- Revision markings
- Internal board configuration
- Connector arrangement
- Terminal condition
- Mounting hardware
- Signs of corrosion or physical damage
- Loose components or damaged wiring
After installation, verify the incoming supply before energizing the equipment. A controlled power-up should then be followed by system diagnostics and operational checks appropriate to the host Yamatake-Honeywell system.
Maintenance Recommendations
For equipment using older control hardware, preventive maintenance is often more useful than replacing individual components after a failure.
Recommended checks include:
- Inspect connectors and terminal points for oxidation or looseness.
- Check internal wiring and harnesses for insulation damage.
- Keep ventilation paths clean and free from dust accumulation.
- Look for signs of overheating around power-related components.
- Check mounting hardware and rack alignment.
- Record the installed board revisions and identification numbers.
- Maintain a verified spare when the equipment is critical to production.
- Avoid applying power to an unknown configuration until the input voltage and wiring have been confirmed.
Replacement Compatibility
When sourcing a replacement for an existing 80364386-100 assembly, match the following items rather than relying on the product name alone:
Required match: 80364386-100
Recommended verification: JS-DNCF02-0 / JS-MLUS40-00 identification, revision, internal board arrangement, connectors, mounting configuration, and host-system compatibility.
A unit carrying the same main part number but having a different internal configuration or revision should be compared carefully before installation.
Inspection Before Shipment
For an industrial control rack of this size and age, a proper pre-shipment inspection should include:
- Part number verification
- Nameplate and label inspection
- Revision verification
- Overall housing inspection
- Connector inspection
- Terminal inspection
- Internal board inspection where accessible
- Wiring and harness inspection
- Fastener and mounting-point inspection
- Visual inspection for corrosion or contamination
- Controlled electrical testing where the appropriate test equipment and system configuration are available
The supplied eBay listing identifies the item as Used, so condition should be evaluated separately from part-number compatibility.
Important Purchasing Note
The 100V input specification is an important identification point. Do not substitute a visually similar Honeywell or Yamatake control assembly simply because the enclosure or connectors appear similar.
For a legacy control system, the safest replacement approach is to match the complete part number and then compare the internal assembly and revision before installation.
Search Terms
Yamatake Honeywell 80364386-100
YAMATAKE-HONEYWELL Control Unit Rack
80364386-100 Control Unit
JS-DNCF02-0
JS-MLUS40-00
Yamatake Honeywell 100V Control Unit
Yamatake Honeywell Industrial Control Rack
Honeywell Legacy Control Unit 80364386-100
