The Emerson LX-1100 (Part Number 180032-00) is a high-precision brushless AC servo drive designed to provide high-performance motion control for industrial motors requiring rapid acceleration and precise positioning.
Product Parameters (Datasheet)
- Model Number: LX-1100
- Part Number: 180032-00
- Drive Type: Brushless AC Servo Drive
- Input Voltage: 230V AC, Single or Three Phase (Model dependent)
- Continuous Current: 10 Amps (Typical for 1100 series)
- Peak Current: 20 Amps
- Feedback Supported: Encoder, Resolver (Interface dependent)
- Control Modes: Torque, Velocity, and Position control
- Communication: Analog +/- 10V, Pulse/Direction, Serial RS-232/485
- Protection: Overvoltage, Undervoltage, Short Circuit, and Thermal Protection
- Cooling: Internal Fan / Heat Sink
Country of Origin
This motion control component is manufactured by Emerson Industrial Automation (often associated with the Control Techniques division), designed and engineered in the USA.
Application Fields
The LX-1100 drive is a staple in high-speed automated machinery, including:
- Packaging Machinery: Powering high-speed labeling and wrapping systems.
- Textile Industry: Controlling tension and feed rates in weaving and spinning.
- Semiconductor Manufacturing: Providing vibration-free positioning for wafer handling.
- Material Handling: Driving robotic arms and precision sorting conveyors.
- Printing Presses: Synchronizing multiple axes for high-quality alignment.
Product Usage Instructions
- Mounting: Install the drive vertically in a vented electrical enclosure, leaving at least 100mm of clearance above and below for airflow.
- Wiring: Connect the AC input power to the L1, L2, L3 terminals. Ensure the motor phases (U, V, W) and feedback cable are securely shielded to minimize EMI.
- Grounding: A low-impedance ground connection is mandatory for both the drive chassis and the motor frame to prevent electrical noise interference.
- Tuning: Use the Emerson/Control Techniques configuration software to auto-tune the current and velocity loops for your specific motor.
- Status Check: Monitor the 7-segment display for error codes (e.g., “OC” for overcurrent) during initial commissioning.
Product Technical Description
The LX-1100 series utilizes advanced PWM (Pulse Width Modulation) technology to deliver smooth, sinusoidal current to brushless AC motors. The 180032-00 hardware revision includes a robust power stage designed for high-cycle industrial environments. Its “Brushless” architecture eliminates the maintenance associated with traditional DC motors, while its fast internal loop updates ensure that the drive can respond to command changes in microseconds, maintaining tight following error tolerances.
Q&A (Common Questions)
Q: Can the LX-1100 drive a third-party brushless motor? A: Yes, as long as the motor’s feedback type (Encoder/Resolver) and electrical specifications (Voltage/Current) are compatible with the drive’s ratings.
Q: What does a flashing display indicate? A: A flashing display usually indicates a “Ready” state or a specific fault code. Refer to the LX-series manual to cross-reference the alphanumeric code shown.
Q: Is it possible to use this drive for simple speed control? A: Absolutely. It can be configured for simple velocity mode using a 0-10V analog input from a potentiometer or PLC.
Q: How do I backup the drive parameters? A: Parameters can be saved to a PC using the serial communication port and the appropriate motion setup utility.
Similar Model Recommendations
- Emerson LX-1102 (Enhanced I/O version)
- Emerson LX-1105 (Higher current rating variant)
- Control Techniques Maxax 100 (Legacy equivalent)
- Emerson DX-1100 (Digital series alternative)
- Emerson LX-1800 (Heavy-duty high-power version)
For further technical data or to purchase the Emerson LX-1100, please visit our product page or contact our support team.
