GE MULTILIN G60 G6P3KH | Generator Protection System Front Panel

🔹 Product Introduction The GE Multilin G60 G6P3KH is a front-panel assembly for the Multilin G60 Generator Protection System. The G60 is a microprocessor-based protection, monitoring, control, and recording relay designed for AC generators driven by steam, gas, or hydraulic turbines. The front panel provides the local operator interface for viewing measurements, status information, alarms,…

AUTRONICA BUR-200 | Autroprime Mimic Driver

📌 Product Introduction The AUTRONICA BUR-200 is a Mimic Driver designed for the Autroprime Interactive Fire Detection System. It drives up to 32 LEDs on a mimic panel for additional alarm indication and provides 8 standard monitored inputs for reading switches or other monitored functions. The BUR-200 communicates through the RS-485 Panel Bus and supports…

MUEGGE MB2727A-140GO_HB01 | Water-Cooled Magnetron

⚡ Product Introduction The MUEGGE MB2727A-140GO_HB01 is a water-cooled industrial magnetron designed for high-power microwave generation. Available trade records identify this specific configuration as a 6 kW, 2450 MHz water-cooled magnetron with an E-magnet and board. MUEGGE’s magnetron portfolio covers industrial microwave heating and plasma applications, including 915 MHz and 2450 MHz systems. The water-cooled…

KEB AUTOMATION 19F6K13-3411 | COMBIVERT F6 Drive Controller

🔹 Product Introduction The KEB Automation 19F6K13-3411 is a COMBIVERT F6 Compact drive controller designed for three-phase AC motor control applications. This configuration is rated for a 400 VAC three-phase input, 60 A output current, and 42 kVA output power, corresponding to a typical 30 kW motor rating. It supports EtherCAT and CAN communication, multiple…

HYUNDAI ACONIS-PMS 960726 | HHI COMM PCB Board DC/DC

  🔹 Product Introduction The HYUNDAI ACONIS-PMS HHI COMM PCB Board 960726 VER DC/DC is a communication-related printed circuit board used within the ACONIS-PMS power management system developed for Hyundai Heavy Industries applications. The available product identification describes it as an HHI COMM PCB with 960726 revision/date marking and DC/DC circuitry. Publicly available ACONIS-PMS documentation…

SHINKO GOP101 (E3-1147A) | C23F04440 Printed Circuit Board

📌 Product Introduction The SHINKO GOP101 (E3-1147A), part number C23F04440, is a printed circuit board used in SHINKO marine and industrial equipment. Current market listings identify the unit as a SHINKO GOP101 PCB Card and consistently associate GOP101 (E3-1147A) with P/N C23F04440. Available listings show both new/open-box and used units, indicating that the board is…

KONGSBERG GLK-100A | Level Gauging Processing Unit

⚓ Product Introduction The KONGSBERG GLK-100A Level Gauging Processing Unit is a marine automation processing unit used as part of a cargo tank level gauging system. Documentation for Kongsberg cargo systems identifies the GLK100A as a signal processing unit used with the GLA100/5-TOP radar tank gauge, with one processing unit assigned to each tank. The…

NORIS N3000-ISC-202-01 | Controller Module

🔹 Product Introduction The NORIS Marine Systems N3000-ISC-202-01 is an ISC controller module used within the NORIS N3000 marine automation and distributed I/O system. The N3000-ISC functions as an independently operating slave unit under an N3000 master unit and is designed for shipboard monitoring, control, and I/O expansion. The ISC unit supports a range of…

GE PANAMETRICS MTS6-3-A-1-0 | Moisture Target Series 6 Analyzer

🔹 Product Introduction The GE Panametrics MTS6-3-A-1-0 is a Moisture Target Series 6 single-channel moisture analyzer designed for continuous measurement of moisture in gases. The MTS6 uses Panametrics thin-film aluminum oxide moisture sensing technology and can display dew/frost point or moisture-related sensor information. It is intended for OEM and process applications where real-time gas moisture…