Product Introduction
โ๏ธ Product: 330730-040-00-00
๐ท๏ธ Brand: BENTLY NEVADA
๐ง Series: 3300 XL
๐ก Product Type: Proximity Probe Extension Cable
The BENTLY NEVADA 330730-040-00-00 is a 3300 XL 11 mm proximity probe extension cable designed for machinery condition monitoring systems. It is used as part of the proximity transducer system to connect the proximity probe with the Proximitor sensor, enabling accurate vibration and position measurement applications.
โ๏ธ The extension cable is commonly applied in rotating machinery monitoring systems such as turbines, compressors, pumps, and industrial rotating equipment. It supports non-contact measurement systems used for shaft vibration, displacement, axial position, and other machine condition parameters.
๐ Before installation, verify the complete part number, cable length, connector type, probe compatibility, Proximitor sensor model, and existing Bently Nevada monitoring system configuration.
Product Datasheet
๐น Model: 330730-040-00-00
๐น Brand: BENTLY NEVADA
๐น Series: 3300 XL 11 mm
๐น Product Type: Proximity Probe Extension Cable
๐น Cable Length: 4.0 meters
๐น Connector Type: Standard Cable Configuration
๐น Application: Vibration and Position Monitoring
๐น Compatible System: 3300 XL 11 mm Proximity Transducer System
๐น Signal Type: Eddy Current Proximity Measurement Signal
๐น Operating Application: Rotating Machinery Condition Monitoring
๐น Mounting: Field Installation / Machinery Monitoring System
๐น Dimensions: Approx. 160 ร 160 ร 120 mm (package size)*
๐น Weight: Approx. 0.14 kg (cable weight)*
๐น Country of Origin: United States*
*Dimensions, weight, packaging data, and technical specifications may vary depending on product configuration and packaging method. Verify the actual product label before installation.
Typical Applications
โก Steam turbine monitoring
๐ญ Industrial rotating equipment
๐ข๏ธ Oil and gas compressor systems
โ๏ธ Pump and motor vibration monitoring
๐ Machinery protection systems
๐ ๏ธ Bently Nevada 3300 XL system maintenance
Installation & Use
๐ ๏ธ Before installation, confirm the 330730-040-00-00 cable length, connector condition, probe model, and Proximitor sensor compatibility. Inspect the cable insulation and connectors for mechanical damage before connection.
๐ Connect the extension cable between the compatible 3300 XL 11 mm probe and Proximitor sensor according to the approved system configuration. Ensure connectors are properly tightened and protected from moisture, vibration, and mechanical stress.
๐ After installation, verify signal stability, vibration measurement values, gap voltage, and monitoring system diagnostics. Complete a functional check before placing the machinery protection system into normal operation.
