⚙️ Product Introduction
The GE DS200PTBAG1AEC is a PTBA termination board designed for the GE Speedtronic Mark V turbine control system.
The termination board provides an organized connection interface between field wiring and the Mark V control system. It is installed inside turbine control cabinets to terminate, distribute, and route control signals from external devices to the associated control electronics.
🔌 Signal Interface Function
The DS200PTBAG1AEC provides terminal blocks and interface points for field signals used within GE turbine control applications. It helps simplify cabinet wiring by providing a centralized connection point for sensors, switches, relays, and other turbine-related devices.
The board works together with GE Mark V control modules and I/O boards to support turbine monitoring, sequencing, and protection functions.
🏭 Typical Applications
• GE Speedtronic Mark V turbine control systems
• Gas turbine control cabinets
• Steam turbine automation
• Generator control systems
• Power plant equipment
• Turbine auxiliary systems
• Industrial process control
• GE legacy control-system maintenance
📋 Product Datasheet
| Parameter | Specification |
|---|---|
| Manufacturer | GE |
| Model | DS200PTBAG1AEC |
| Series | Mark V Speedtronic |
| Product Type | PTBA Termination Board |
| Board Function | Field Signal Termination Interface |
| Application | Turbine Control System |
| Terminal Type | Screw Terminal Blocks |
| Signal Interface | Analog / Digital Field Signals* |
| System Compatibility | GE Mark V |
| Revision | A1EC |
| Communication | Through Connected Mark V Boards |
| Power Supply | System Supplied |
| Installation | Turbine Control Cabinet |
| Mounting Type | Panel Mount |
| Cooling | Cabinet Air Cooling |
| Operating Temperature | System-dependent |
| Storage Temperature | System-dependent |
| Dimensions | Approx. 280 × 150 mm* |
| Weight | Approx. 0.5 kg* |
| Country of Origin | USA* |
*Exact terminal quantity, signal assignment, dimensions, and weight depend on the board revision and system configuration. Verify terminal labels and GE documentation before installation.
🔧 Key Features
• GE Mark V PTBA termination board
• Designed for turbine-control field wiring
• Provides centralized signal termination
• Supports industrial cabinet wiring applications
• Compatible with GE Speedtronic architecture
• Suitable for maintenance and replacement projects
• Rugged industrial PCB design
⚡ System Integration
The DS200PTBAG1AEC serves as a field wiring interface within the Mark V turbine control architecture. Field devices connect to the termination board, while connected Mark V control boards process the received signals.
Correct terminal identification is essential because turbine control systems contain critical monitoring and protection circuits. Incorrect wiring may cause incorrect signals, alarms, or equipment trips.
🛠️ Installation Notes
Before installation, verify the complete part number DS200PTBAG1AEC, board revision, terminal layout, cabinet position, and associated Mark V control hardware.
Disconnect system power before replacing the board. Label all field cables and record the original terminal positions before removal.
During installation, inspect terminal screws, connectors, and PCB contacts. After replacement, verify signal continuity, I/O status, alarms, and turbine-control diagnostics.
⚙️ Commissioning Checklist
• Confirm GE part number and revision
• Verify Mark V compatibility
• Check terminal wiring
• Inspect cable connections
• Verify signal routing
• Check connected I/O boards
• Review system diagnostics
• Test monitoring functions
• Confirm normal operation
⚠️ Compatibility Notice
The GE DS200PTBAG1AEC is a dedicated Mark V PTBA termination board. It is not a standalone PLC module and requires installation within the correct GE Speedtronic turbine-control system.
For replacement applications, always match the complete DS200 part number, revision code, terminal arrangement, and existing cabinet configuration.
📦 Product Identification
Brand: GE
Model: DS200PTBAG1AEC
Series: Speedtronic Mark V
Product Type: PTBA Termination Board
Function: Field Signal Interface
Application: Gas / Steam Turbine Control
System: GE Mark V
