ABB 1SAP260100R3001 | PD501-4CH Positioning Module

📝 Product Description

The ABB 1SAP260100R3001 is a PD501-4CH positioning module for the ABB S500 distributed automation I/O platform. It is designed for positioning applications involving 24 VDC motors and provides four motor-control channels, with one analog position-feedback input per axis. ABB documentation specifies four transistor full H-bridge digital outputs rated at 24 VDC and 4 A, together with four 0–10 V analog inputs for position feedback.

The module can be used to integrate motor movement and position feedback into an ABB AC500 automation architecture. Its 12-bit analog input resolution, 10 V sensor supply, overload protection, and electrical isolation support integration with positioning sensors and small DC motor applications. The ABB product identification confirms PD501-4CH, product ID 1SAP260100R3001, with a net weight of approximately 0.148 kg and dimensions of 62 × 67.5 × 76 mm.

1SAP260100R3001 PD501-4CH

🔧 Key Features

ABB S500 positioning module
Product ID 1SAP260100R3001
Type designation PD501-4CH
4 positioning channels
4 transistor full H-bridge digital outputs
24 VDC motor operation
4 A output rating
4 analog position-feedback inputs
0–10 V analog input range
12-bit analog resolution
10 VDC sensor supply output
24 VDC process supply
IP20 protection
Suitable for ABB AC500 automation systems

📋 Product Datasheet

Parameter	Specification
Brand	ABB
Model	PD501-4CH
Part Number	1SAP260100R3001
Series	S500 Distributed Automation I/O
Product Name	Positioning Module
Positioning Channels	4
Digital Outputs	4 × Full H-Bridge Transistor
Output Rating	24 VDC, 4 A
Analog Inputs	4 × 0–10 V
Analog Resolution	12-bit
Sensor Supply	10 VDC, up to 90 mA
Supply Voltage	24 VDC
Dimensions	62 × 67.5 × 76 mm
Net Weight	0.148 kg
Protection Rating	IP20
Condition / Status	Verify actual item condition before installation

❓ Common Questions & Answers

Q: What is the ABB PD501-4CH used for?
A: It is a positioning module designed to control the movement of 24 VDC motors while receiving analog position feedback.

Q: How many motors can it control?
A: ABB specifies four positioning channels, with four digital H-bridge outputs and one analog input per axis.

Q: What is the digital output rating?
A: Each positioning output is specified as a 24 VDC full H-bridge transistor output with a 4 A rating.

Q: What type of position feedback is supported?
A: The module provides four voltage analog inputs with a 0–10 V range and 12-bit resolution.

Q: What supply voltage does the module require?
A: The specified process supply is 24 VDC.

Q: What are the physical dimensions?
A: ABB-related product data lists approximately 62 mm depth, 67.5 mm width, and 76 mm height, with a net weight of approximately 0.148 kg.

Q: Is 1SAP260100R3001 the same as PD501-4CH?
A: Yes. ABB documentation identifies 1SAP260100R3001 as the product ID for the PD501-4CH positioning module.

Q: Can it be substituted with another S500 module?
A: Not automatically. The number of positioning channels, H-bridge output requirements, feedback signal range, supply voltage, and system configuration should be checked before replacement.