GE | DS200SDCCG4A | Drive Control Card

The General Electric (GE) Drive Control Card, featuring part number DS200SDCCG4A, is a high-performance microprocessor-based control board designed specifically for GE industrial drive systems, such as the EX2100, Mark VI, and AF-300 series drives.

Manufactured by GE Industrial Systems, this circuit board serves as the primary processing core responsible for executing drive control algorithms, managing motor commutation, processing feedback signals, and coordinating system communications. It ensures precise speed, torque, and directional control across demanding heavy industrial drive applications.

📊 Product Parameters & Technical Datasheet

• Brand: GE (General Electric)

• Model: DS200SDCCG4A

• Series: Mark VI / EX2100 Drive Control Series

• Product Name: Drive Control Card / Microprocessor Core Board

• Country of Origin: United States

• Product Status: Industrial Automation Hardware / Replacement Part

• Dimensions: Standard printed circuit board form factor for drive rack mounting

• Weight: Approx. 0.9 kg

• Power Consumption: Low power draw supplied via drive rack internal power bus

• Discontinuation Status: Mature industrial product supported by specialized aftermarket providers

⚙️ Parameter Setting & Modification Methods

Configuring and adjusting parameters on the DS200SDCCG4A board is performed using GE’s ToolboxST or legacy PC-based configuration software suites connected via dedicated serial or network communication ports.

Technicians access the software interface to update motor control parameters, tune PID loops, adjust speed reference limits, and manage firmware configurations. All adjustments require proper administrative security clearance and should be verified offline or during planned maintenance periods to prevent unintended drive behavior or process downtime.

🔄 Manual and Automatic Mode Switching

The control card operates primarily through real-time automated processing loops while supporting managed manual control transitions.

In automatic mode, the processor executes continuous closed-loop motor control, real-time feedback regulation, and system self-diagnostics autonomously without operator intervention. Manual overrides, parameter tuning, or diagnostic test modes can be engaged via software commands or local control panels during routine maintenance, motor calibration, or troubleshooting procedures.

❓ Frequently Asked Questions (Q&A)

Q1: What is the primary function of the DS200SDCCG4A control card?

A1: It acts as the core processing board for GE industrial drives, managing motor control algorithms, feedback signals, and system communication.

Q2: What software is used to configure and troubleshoot this control card?

A2: It is configured and monitored using GE’s specialized software tools, such as ToolboxST, designed for Mark VI and EX2100 drive platforms.

Q3: Can this control board be hot-swapped in an active drive cabinet?

A3: No, complete system power isolation and lockout/tagout (LOTO) safety procedures must be strictly enforced before removing or installing drive control cards.

🌟 Recommended GE Models

• GE DS200SDCCG1ADC (Drive Control Card)

• GE DS200LDCCH1A (Drive LAN Control Board)

• GE DS200PTIBG1ABB (Potential Transformer Input Board)

• GE DS200TCQBG1B (Thermocouple Input Board)

• GE IS200SRLYH2A (Relay Output Board)

• GE IS200STAIH1A (Analog Input Board)

• GE IS200DSPXH1A (Digital Signal Processor Board)

• GE IS200EPPSG1A (Power Supply Board)

• GE DS200PCCAG1ACC (Power Supply Control Board)

• GE DS200FCRAG1BED (Exciter Control Board)