The GE IS200EPSMG2AEC is a specialized Power Supply Ground Module designed for the Mark VI and Mark VIe turbine control systems. Engineered to provide reliable power distribution, system grounding, and diagnostic monitoring, this printed circuit board assembly ensures stable operation across high-stakes industrial gas and steam turbine management platforms. Built with heavy-duty industrial components, the IS200EPSMG2AEC Ground Module helps protect sensitive electronics from electrical noise, voltage transients, and ground faults, guaranteeing continuous plant reliability.
Technical Specifications & Datasheet
- Brand: General Electric (GE / Alstom)
- Model: IS200EPSMG2AEC
- Series: Mark VI / Mark VIe Distributed Control System
- Product Name: Power Supply Ground Module
- Place of Origin: United States / Global Manufacturing
- Product Status: Active / Factory Original
- Dimensions: 178 mm x 102 mm x 25 mm
- Weight: 0.42 kg
- Power Input: Standard rack backplane power distribution
- Discontinuation Status: Supported Legacy Component
Parameter Configuration and Modification Methods
As a hardware-level power distribution and grounding board, the IS200EPSMG2AEC does not typically require complex software programming or parameter configuration. However, setup and validation involve precise physical procedures:
- Hardware Inspection: Verify that all board-mounted jumpers, terminal blocks, and ribbon cable connectors match the system design specifications before installation.
- Power Isolation: Ensure all rack power supplies are completely shut down and locked out before inserting or removing the module.
- Chassis Seating: Slide the module securely into its designated slot within the VME rack or core pack enclosure, tightening captive fastening screws.
- Diagnostic Verification: Power on the system and check the diagnostic LEDs on the module or view status indicators via the ToolboxST application software to confirm correct grounding and voltage levels.
Manual / Automatic Mode Switching
Operational control modes for power supply and grounding modules are managed automatically by the Mark VI controller architecture.
- Automatic Mode: The module continuously monitors ground continuity, supply voltage stability, and fault conditions, reporting status updates to the primary controller without operator intervention.
- Manual Mode: Physical diagnostics or multimeter testing can be performed manually by maintenance personnel during scheduled outages or troubleshooting procedures.
- Switching Procedure: Since this is a passive monitoring and grounding board, no active runtime mode switching is required by the operator.
Frequently Asked Questions (Q&A)
- Q: What is the primary function of the IS200EPSMG2AEC module?
- A: It serves as a power supply grounding module within the GE Mark VI control system, managing system reference grounds and power distribution diagnostics.
- Q: Can this module be replaced while the turbine control system is live?
- A: Hot-swapping power and ground modules is generally discouraged unless specific redundant core procedures and safety guidelines are followed.
- Q: How does the module communicate status to the control system?
- A: It interfaces directly through the rack backplane to transmit diagnostic and health status data to the main controller processors.
Recommended Alternative Models from GE
- GE IS200EPDMG1ACB – Exciter Power Distribution Module
- GE IS200TURAH1AAA – Turbine Regulation Terminal Board
- GE IS200TBCIS1C – Discrete Input/Output Terminal Board
- GE IS200DSPXH1AED – Digital Signal Processor Board
- GE IS200VRTCH1C – VME Read Termination Card
- GE IS200JPDSG1AAA – Jumper and Power Distribution Board
- GE IS200STAIH1AAA – Simplex Analog Input Board
- GE IS200SRTDH2AAA – RTD Input Terminal Board
- GE DS200TCQBG1B – Thyristor Control Board
- GE DS200PCCAG1ACC – Power Supply Controller Card
