๐ง Product Overview
The ULTRA UIC-PSY-06 is a 24 VDC power supply module designed for use within a programmable logic controller system. The available unit is identified as Version 1.1 and has a listed power rating of 24 V, 3 A.
This module is associated with the ULTRA UIC PLC hardware family and is commonly found alongside controller and I/O components such as the UIC-CPU-01, UIC-INP-16, UIC-DCO-16 and UIC-TCI-04. The available listing identifies the unit as used, so the exact condition of connectors, terminals and enclosure should be checked before installation.
โ๏ธ Key Features
- Brand: ULTRA
- Model: UIC-PSY-06
- Version: 1.1
- Power supply rating: 24 V, 3 A
- PLC system power module
- Designed for ULTRA UIC-series control hardware
- Associated with UIC PLC CPU and I/O modules
- Compact industrial control-system component
- Suitable as a replacement or maintenance spare
- Used condition according to the available listing
๐ Product Datasheet
| Parameter | Specification |
|---|---|
| Brand | ULTRA |
| Model | UIC-PSY-06 |
| Product Type | PLC Power Supply |
| System | ULTRA UIC PLC |
| Version | 1.1 |
| Rated Voltage | 24 V |
| Rated Current | 3 A |
| Rated Power | Approx. 72 W |
| Associated CPU | UIC-CPU-01 |
| Related Input Module | UIC-INP-16 |
| Related Output Module | UIC-DCO-16 |
| Related Thermocouple Module | UIC-TCI-04 |
| Weight | Approx. 4.740 kg |
| Condition | Used |
| Country of Origin | Not specified |
โก Operating Function
The main purpose of the UIC-PSY-06 is to provide the DC power required by the associated PLC/control-system hardware.
With a 24 V and 3 A rating, the module can provide up to approximately 72 W under the stated rating. Actual usable capacity depends on the connected UIC system configuration, wiring, environmental conditions and load distribution.
For a replacement installation, do not match the voltage alone. Confirm the complete part number, Version 1.1 identification, connector arrangement and system configuration before energizing the unit.
๐ ๏ธ Installation & Configuration
- Verify the identification
Check the UIC-PSY-06 part number and Version 1.1 marking against the existing system documentation. - Inspect the module
Examine terminals, connectors, housing and PCB areas for corrosion, contamination, cracks or signs of overheating. - Check the power circuit
Confirm the required supply voltage and polarity before connecting the module. - Check the load
Make sure the connected PLC hardware does not exceed the 24 V / 3 A rating. - Inspect associated modules
If the power supply is being installed together with UIC-CPU-01, UIC-INP-16, UIC-DCO-16 or UIC-TCI-04, verify the complete rack configuration. - Power-up test
After installation, monitor the output voltage and check the PLC system for abnormal alarms, communication errors or unstable operation.
๐ง Maintenance Tips
Keep the power supply dry and free from conductive dust. Inspect terminals periodically, especially in marine, humid or high-temperature control cabinets.
For used spare units, a controlled bench test before installation is recommended. Check output stability under load rather than relying only on an unloaded voltage measurement.
If the module shows excessive heating, intermittent output or abnormal voltage fluctuation, remove it from service and investigate the power supply and downstream load.
โ Common Questions
What is the ULTRA UIC-PSY-06?
It is a PLC power supply module used with the ULTRA UIC control-system family.
What is its rated output?
The available product information specifies 24 V and 3 A, equivalent to approximately 72 W.
What version is this unit?
The available unit is identified as Version 1.1.
Is it a PLC CPU?
No. The UIC-PSY-06 is a power supply module. The UIC-CPU-01 is the associated CPU/control module.
Is the unit new?
The available listing identifies this particular unit as Used.
Can it replace another 24 V power supply?
Not automatically. Replacement should be based on the exact UIC system, connector configuration, electrical rating and revision rather than voltage alone.
What should be checked before purchase?
Confirm the exact model, revision/version, connector condition, physical condition and compatibility with the existing UIC PLC configuration.
๐ Related ULTRA UIC Models & Components
- ULTRA UIC-CPU-01 โ PLC CPU Module
- ULTRA UIC-INP-16 โ DC Input Module
- ULTRA UIC-DCO-16 โ DC Output Module
- ULTRA UIC-TCI-04 โ Thermocouple Module
- ULTRA UIC-PSY-06 โ PLC Power Supply
- UIC PLC CPU and processor assemblies
- UIC digital input modules
- UIC digital output modules
- UIC thermocouple input modules
- UIC-series PLC power and I/O assemblies
The first five part numbers above are specifically identified with the same UIC system in available product records; the remaining entries describe related component categories rather than claiming separate verified part numbers.
๐ญ Application Summary
The ULTRA UIC-PSY-06 is best treated as a dedicated PLC-system spare rather than a generic 24 V industrial power supply. Its value is mainly in maintaining an existing UIC control system where the original power module is difficult to source.
For maintenance inventory, keeping a correctly identified UIC-PSY-06 as a spare can reduce downtime when an installed power module develops output instability or fails. Before installation, always match the complete UIC configuration and verify the module’s electrical condition.
