Description
🔧 Product Overview
The BOSCH ICL700-1/C/1/.5 1070068197-402 is an industrial module board associated with Bosch/Indramat NC and servo-control equipment. Available references identify 1070068197-402 as an ICL700 module board, with closely related ICL700 variants including 1070068197-401 and 1070068197-405.
The ICL700 family is used within Bosch industrial control architectures where dedicated electronic modules handle machine-control and interface functions. Because the exact ICL700 configuration can vary by machine generation, the board marking, revision, connector arrangement, and installed system should be checked before replacement.
This board is particularly suitable as a maintenance spare for older Bosch CNC, servo, and industrial machine-control systems where maintaining the original hardware configuration is preferable to modifying the control architecture.
⚙️ Key Features
- 🧩 Model: ICL700-1/C/1/.5
- 🔢 Part Number: 1070068197-402
- 🏭 Manufacturer: Bosch / Bosch Indramat
- 🖥️ Application Area: Industrial NC, CNC and machine-control systems
- 🔌 Board Type: ICL700 module/interface board
- 🔄 Designed for use within compatible Bosch control-system architectures
- 🛠️ Suitable for maintenance, repair and spare-parts inventory
- 📦 Useful for supporting older Bosch industrial equipment during lifecycle maintenance
📋 Product Datasheet
| Parameter | Specification |
|---|---|
| Brand | BOSCH |
| Model | ICL700-1/C/1/.5 |
| Part Number | 1070068197-402 |
| Series | ICL700 |
| Product Type | Module Board / Circuit Board |
| Application | Industrial NC / CNC Control |
| Function | Control/interface module function, configuration dependent |
| Condition | Used, according to supplied listing |
| Origin | Bosch industrial automation equipment; exact board manufacturing origin should be verified from the label |
| Dimensions | Not reliably specified; verify against the installed board |
| Weight | Not reliably specified |
| Power Requirement | System/configuration dependent; verify from machine documentation |
🧩 ICL700 System Integration
The ICL700-1/C/1/.5 belongs to a group of Bosch ICL700 boards used in industrial automation equipment. Available component references also identify an ICL700-1/C/1/.5 1070068197-401 as a clear-output module, while 1070068197-402 is separately cataloged as an ICL700 module board/card. This means the suffix and complete part number should be treated as important identification information rather than assuming that nearby part numbers are interchangeable.
When integrating a replacement board, technicians should verify:
- Existing Bosch control-system family
- Complete board part number
- Board revision and hardware markings
- Connector locations and keying
- Rack or mounting position
- Associated ICL700 modules
- Machine-specific parameter and configuration data
- Firmware or memory configuration where applicable
🔌 Control & Interface Considerations
For an older Bosch CNC or machine-control system, the board should be treated as a system-level replacement component rather than a generic PCB.
Before installation, compare the replacement against the removed board for:
- Connector type and position
- PCB identification label
- Component layout
- Revision markings
- Jumper or switch settings
- Interface configuration
- Associated control modules
- Existing machine documentation
Do not assume that 1070068197-401, 1070068197-402, and 1070068197-405 are direct substitutes simply because they belong to the same ICL700 family. The complete ordering code and application must be confirmed.
🏭 Typical Applications
The Bosch ICL700 series is encountered in older industrial automation and NC equipment, particularly in machine-control environments associated with Bosch/Indramat technology.
Typical maintenance applications include:
- 🏗️ CNC machine tools
- ⚙️ Industrial machine-control cabinets
- 🔄 Bosch servo-control systems
- 🧠 NC control equipment
- 🏭 Automated production machinery
- 🔧 Retrofit and machine restoration projects
- 📦 Critical spare-parts inventory for discontinued equipment
🛠️ Installation & Maintenance
Before replacing the board:
- 🔌 Shut down the machine according to the manufacturer’s procedure.
- ⚡ Isolate incoming power and verify that hazardous voltages have discharged.
- 📸 Record the original board position, connectors and jumper settings.
- 🏷️ Compare the complete part number and revision markings.
- 🔧 Remove the existing board using appropriate ESD protection.
- 🧩 Install the replacement in the same rack or mounting position.
- 🔌 Reconnect all interfaces according to the original configuration.
- 🧪 Power up and check the control system for diagnostic messages.
- ⚙️ Verify machine parameters and axis/control operation before returning the equipment to production.
For long-term storage, keep the PCB in an ESD-safe package and protect it from moisture, dust, mechanical impact and electrostatic discharge.
🔍 Troubleshooting
Machine does not recognize the replacement board
Check the complete part number, revision, rack position, connector seating and machine configuration. A board from the same ICL700 family is not automatically a compatible replacement.
Control system reports a module fault
Inspect connectors and rack contacts first. Check for incorrect jumper or configuration settings and compare the replacement with the original board.
Intermittent machine operation
Inspect edge connectors, oxidation, loose connections and signs of overheating. Also check the associated power supply and neighboring modules.
Replacement appears electrically different
Stop commissioning and compare the board’s complete identification markings with the removed unit. Do not modify wiring simply to force compatibility.
Machine starts but requires configuration recovery
Some older CNC systems may depend on machine-specific parameters or configuration data. Preserve the original configuration before replacing control hardware whenever possible.
❓ FAQ
Q: What is the exact part number of this board?
A: The supplied identification is 1070068197-402, with the module designation ICL700-1/C/1/.5.
Q: Is this the same as Bosch 1070068197-401?
A: No direct interchangeability should be assumed. 1070068197-401 is separately identified within the ICL700 family, so the complete machine configuration must be checked.
Q: What equipment can use this board?
A: It is associated with Bosch industrial NC/CNC and machine-control equipment. Exact compatibility depends on the machine and control configuration.
Q: Can this board be used as a universal PLC module?
A: No. It should be treated as a specialized Bosch industrial control-system component rather than a general-purpose PLC module.
Q: What should I check before ordering?
A: Confirm the complete Bosch part number, ICL700 designation, revision, board layout, connectors and the part number of the original installed board.
Q: Is 1070068197-402 interchangeable with 1070068197-405?
A: Do not assume interchangeability. Both are listed as ICL700 boards, but the suffix identifies a different hardware version or configuration.
📦 Recommended Related Bosch Models & Components
- BOSCH ICL700-1/C/1/.5 1070068197-401 Board
- BOSCH ICL700-1/C/1/.5 1070068197-405 Module Board
- BOSCH ISA_2 1070077092-101 Module Board
- BOSCH ISA_2.DP 1070077092-102 Module Board
- BOSCH 1070070309-211 CPU Board
- BOSCH 1070070309-212 Control Card
- BOSCH 1070070309-213 Control Card
- BOSCH 1070070767-201 SMNC Board
- BOSCH 1070075887-202 BM-DP12 Module
- BOSCH 1070077285-210 R200P Card
These related references are useful when building a spare-parts inventory for older Bosch NC and industrial control systems, but each replacement should still be matched against the original machine configuration.
📌 Spare-Part Recommendation
For aging Bosch CNC and industrial machine systems, keeping an ICL700-1/C/1/.5 1070068197-402 board available can reduce downtime when an installed module develops a hardware fault.
For critical equipment, record the original board’s complete part number, revision, machine application and connector configuration in the spare-parts database. When purchasing a replacement, prioritize an exact part-number match rather than relying only on the general ICL700 family designation.
