Description
🚀 Built for advanced industrial turbine safeguarding, the Woodward 8237-1368 ProTech-GII Overspeed Protection system incorporates a triple-modular redundant (TMR) architecture to secure steam, gas, and hydro turbines. This unit utilizes dedicated discrete inputs across its modules (3 channels per module, 9 total), which include the Alarm/Trip Reset Command, Start Command, and Speed Fail Override Command, enabling precise remote management and exceptional fault tolerance during operations.
Technical Specifications & Datasheet
⚙️ Dimensions: 330 mm x 445 mm x 159 mm (13 x 17.5 x 6.25 inches)
⚖️ Weight: Less than 23 lbs (10.4 kg)
🌍 Country of Origin: United States
⚡ Power Consumption: 90 W nominal per system rack
🔌 Operating Voltage: High Voltage 90–264 VAC / 47–63 Hz or Low Voltage 18–32 VDC
🌡️ Operating Temperature: -20°C to +60°C (-4°F to +140°F)
🛡️ Enclosure Rating: IP56 dust and water protection when properly mounted
⏱️ Response Time: 12 ms independent voted trip actuation time
🔄 Speed Range: 0.5 to 32,000 RPM rotor speed monitoring capability
🔌 Communication Interface: Triple-redundant RS-232, RS-422, and RS-485 Modbus ports
Operating Procedures & Usage Methods
🛠️ Mount the ProTech-GII unit securely into its designated bulkhead enclosure or panel cutout, ensuring the IP56 gasket seal remains intact to protect against environmental contaminants and heavy moisture.
🔧 Configure and execute control commands using the integrated discrete inputs (3 channels per module, 9 total), utilizing the Alarm/Trip Reset Command to clear latched faults, the Start Command to initiate monitoring sequences, and the Speed Fail Override Command during specific diagnostic checks.
📋 Access real-time operational data, configure 2-out-of-3 voting parameters, and inspect rolling event logs via the high-resolution 4.2-inch color display screen located on each module front panel.
Power Sequencing Guidelines
🔌 Startup Sequence: Apply power to the redundant high-voltage (90–264 VAC) or low-voltage (18–32 VDC) supplies to initiate internal diagnostics across modules A, B, and C, ensuring zero fault codes are present before turbine rotation begins.
🛑 Shutdown Sequence: Isolate power sources only after the turbine has reached a complete and safe standstill, preventing premature interruption of system logs and safety relay tracking during coast-down.
Product Usage Instructions
📖 Utilize the built-in automated periodic test functionality driven by the internal frequency generator to verify overspeed trip paths without artificially overspeeding the physical turbine machinery.
📖 Monitor real-time speed feedback smoothly via the 4–20 mA analog outputs (1 per module, 3 total) configured for direct integration into plant distributed control systems (DCS).
Frequently Asked Questions
💡 Q: What specific discrete inputs are featured on the 8237-1368 model?
A: It features 3 discrete inputs per module (9 total across the system): Alarm/Trip Reset Command, Start Command, and Speed Fail Override Command.
💡 Q: What is the primary purpose of the Speed Fail Override Command?
A: It allows operators to bypass certain speed sensor fault restrictions during specific maintenance or troubleshooting scenarios under strict safety protocols.
💡 Q: Does the system support live online repair?
A: Yes, its triple-modular redundant structure permits individual module servicing or replacement while the turbine is safely running under standard operating procedures.
Recommended Woodward ProTech Series & Industrial Models
- Woodward ProTech-GII 8237-1240 Standard Overspeed Trip Device
- Woodward ProTech-GII 8237-1245 Dual-Channel Safety System
- Woodward ProTech-GII 8237-1246 Configurable Overspeed Detection System
- Woodward ProTech-GII 8237-1247 Bulkhead-Mounted Overspeed Protection Device
- Woodward ProTech-GII 8237-1369 Advanced TMR Overspeed System
- Woodward ProTech TPS Total Protection System
- Woodward ProTech-SX Safety System
- Woodward NetCon Control System Processor 5466-500
- Woodward MicronNet Digital Controller 5466-258
- Woodward Atlas Digital Control Module 5466-401
