Description
🚀 Engineered for precise industrial engine and turbine management, the Woodward 9905-030 is a forward-acting, high-voltage load sharing and speed control module within the trusted 2301A series. It delivers reliable prime mover speed regulation and proportional active power load distribution for generators operating individually or in parallel configurations across high-voltage plant architectures.
Technical Specifications & Datasheet
⚙️ Dimensions: 221 mm x 155 mm x 64 mm (Standard 2301A enclosure format)
⚖️ Weight: Approx. 1.8 kg (4 lbs)
🌍 Country of Origin: United States
⚡ Power Consumption: 15 W nominal
🔌 Operating Voltage: High-voltage range (typically 88–132 VAC / 90–150 VDC)
🌡️ Operating Temperature: -40°C to +85°C (-40°F to +185°F)
🛡️ Enclosure Rating: IP20 chassis-mount with metallic product backplane
⏱️ Control Action: Forward-acting output configuration
🔄 Speed Range: Rated speed up to 11,450 Hz derived via MPU frequency input
🔌 Actuator Output: Compatible with standard proportional actuators requiring high-voltage system support
Operating Procedures & Usage Methods
🛠️ Securely mount the module onto its metallic backplane inside a protective industrial control panel or cabinet, ensuring proper vertical clearance for terminal connections and natural convection cooling.
🔧 Connect the magnetic pickup (MPU) speed sensor, current transformers, actuator lines, and high-voltage power source strictly according to the terminal wiring diagram on the unit housing.
📋 Adjust the front-panel potentiometers (such as gain, reset, speed trim, and load droop/isochronous settings) carefully during initial calibration to match engine dynamics and synchronization parameters.
Power Sequencing Guidelines
🔌 Startup Sequence: Energize the high-voltage power feed to initialize internal control circuits, verify that MPU speed signals stabilize within range, and confirm zero fault codes before enabling fuel or steam delivery to the prime mover.
🛑 Shutdown Sequence: Disable the actuator control loop or cut fuel/steam supply to bring the prime mover to a complete, safe stop prior to isolating the main high-voltage system power feed.
Product Usage Instructions
📖 Ensure the forward-acting output configuration matches the response characteristics of your specific fuel valve or actuator to guarantee stable closed-loop speed control.
📖 Select isochronous mode when coordinating constant frequency across multiple paralleled engines, or switch to droop mode for single-engine speed governing and isolated electrical generation.
Frequently Asked Questions
💡 Q: What are the primary electrical ratings of the 9905-030 model? A: It is a forward-acting, high-voltage load sharing and speed control unit designed to operate on high-voltage power supplies (88–132 VAC / 90–150 VDC).
💡 Q: What does “forward-acting” signify for this controller? A: It means an increase in the internal control signal output drives a corresponding increase in actuator position, such as opening a fuel valve.
💡 Q: What is the main application of this device? A: It is utilized to govern prime mover speed and divide active electrical load proportionally among generators running in parallel.
Recommended Woodward Series & Industrial Models
- Woodward 2301A Load Sharing and Speed Control 9907-018
- Woodward 2301A Load Sharing and Speed Control 9900-430
- Woodward 2301A Load Sharing and Speed Control 9905-022
- Woodward 2301A Load Sharing and Speed Control 9905-026
- Woodward 2301D Digital Load Sharing and Speed Control 9907-118
- Woodward 2301E Digital Governor 9907-1200
- Woodward MicroNet Digital Controller 5466-258
- Woodward NetCon Control System Processor 5466-500
- Woodward ProTech-GII 8237-1240 Standard Overspeed Trip Device
- Woodward Atlas Digital Control Module 5466-401
