🔹 Product Introduction
The ABB PU515 3BSE013063R1 is a Real-Time Accelerator (RTA) board used for communication with ABB Advant MasterBus 300 systems. ABB documentation identifies the RTA board as communication hardware for connection to the MasterBus 300 control network. The PU515 is an internal PCI RTA board and is associated with ABB Advant and 800xA environments, where it provides the communication interface required by compatible control-system connectivity applications. Published ABB installation documentation specifies that PU515 and PU514 boards require a 5 V PCI slot, while later PU515A hardware replaced the original PU515.
PU515 3BSE013063R1
📋 Product Datasheet
| Parameter | Value |
|---|---|
| Brand | ABB |
| Model | PU515 |
| Series | Advant / MasterBus 300 |
| Product Name | Real-Time Accelerator (RTA) Board |
| Part Number | 3BSE013063R1 |
| Product Status | Legacy / Older-generation hardware |
| Dimensions | Approx. 30 × 540 × 150 mm |
| Weight | Approx. 0.4 kg |
| Original Country of Origin | Sweden |
| Power / Interface | 5 V, 32-bit 33 MHz PCI; Dual-Channel MB300 |
The PU515 is specified as a dual-channel MasterBus 300 communication board for a 5 V, 32-bit, 33 MHz PCI bus and has 16 MB of memory according to published product information.
🔧 Troubleshooting & Common Issues
• If the RTA board is not detected, verify that it is installed in a compatible 5 V PCI slot.
• Check that the PCI connector is fully seated and free from contamination or mechanical damage.
• Verify the MasterBus 300 network connections and associated communication hardware.
• If communication with the Advant control system is unavailable, check the RTA configuration in the associated 800xA environment.
• Confirm that the installed RTA board type matches the software and connectivity configuration.
• Check system logs and RTA status indications when diagnosing communication problems.
• If replacing an original PU515, verify whether the application requires a PU515, PU515A, or another supported RTA solution.
⚠️ Safety Precautions
• Shut down and isolate the host computer before installing or removing the PCI board.
• Follow the computer manufacturer’s ESD and PCI installation procedures.
• Use an antistatic wrist strap when handling the board.
• Do not force the PCI connector into an incompatible slot.
• Verify the slot voltage and physical interface before installation.
• Back up relevant 800xA and Advant configuration data before making changes to communication hardware.
• Perform communication and system-function tests after installation before returning the control system to normal operation.
📰 Product-Related News & Industry Context
ABB’s 800xA documentation identifies the RTA as communication hardware used to connect systems to the MasterBus 300 control network. ABB documentation also distinguishes between the original PU515/PU514 boards and the later PU515A/PU514A versions. The later PU515A uses PCI-X133 and is described by ABB as the replacement for the original PU515, while the original PU515 requires a 5 V PCI slot.
The PU515 is therefore particularly relevant to maintenance of legacy Advant and MasterBus 300 installations where the existing computer and communication architecture must be preserved.
❓ Q&A
Q: What is the ABB PU515?
A: The PU515 is an ABB Real-Time Accelerator board used as communication hardware for MasterBus 300 systems.
Q: What is the full part number?
A: The supplied model is PU515 with ABB part number 3BSE013063R1.
Q: What network does the PU515 support?
A: It provides communication with ABB MasterBus 300 control networks.
Q: What type of computer interface does the PU515 use?
A: The original PU515 is an internal PCI RTA board and requires a compatible 5 V PCI slot.
Q: How much memory does the PU515 have?
A: Published product information lists 16 MB of memory.
Q: Is PU515 the same as PU515A?
A: No. They are different hardware generations. ABB documentation states that PU515A replaced PU515 and uses a PCI-X133 interface, while the original PU515 requires a 5 V PCI slot.
Q: Can I replace PU515 directly with PU515A?
A: The replacement should be checked against the host computer, PCI interface, operating environment, and installed ABB software before installation.
Q: Is the PU515 discontinued?
A: It should be treated as legacy hardware because ABB documentation identifies PU515A as the replacement for the original PU515.
⭐ Recommended ABB Models
- ABB PU514 — Real-Time Accelerator RTA Board
- ABB PU515A — Real-Time Accelerator RTA Board
- ABB PU410 — Real-Time Accelerator Unit
- ABB CI520 — Advant Controller Communication Interface
- ABB CI522A — Advant Controller Communication Interface
- ABB CI532V01 — Communication Interface Module
- ABB CI541 — Advant Controller Communication Interface
- ABB CI546 — Advant Communication Interface
- ABB AC410 — Advant Controller
- ABB AC450 — Advant Controller
