📌 Product Introduction
The AUTRONICA BUR-200 is a Mimic Driver designed for the Autroprime Interactive Fire Detection System. It drives up to 32 LEDs on a mimic panel for additional alarm indication and provides 8 standard monitored inputs for reading switches or other monitored functions. The BUR-200 communicates through the RS-485 Panel Bus and supports master/slave daisy-chain configurations. Up to 8 BUR-200 units can be connected, providing a system capacity of 256 LED outputs and 64 monitored inputs. The unit is designed for DIN-rail mounting and uses a redundant 24 VDC supply arrangement.
AUTRONICA BUR-200
📋 Product Datasheet
| Parameter | Value |
|---|---|
| Brand | AUTRONICA |
| Model | BUR-200 |
| Series | Autroprime |
| Product Name | Mimic Driver |
| Part Number | 116-BUR-200 |
| Place of Manufacture | Norway |
| Product Status | New – Open Box |
| Dimensions | 181 × 125 × 40 mm |
| Weight | Approx. 300 g |
| Power | 24 VDC, 18–32 VDC; maximum consumption 25 mA |
| Discontinued | Current lifecycle status not confirmed |
⚙️ Troubleshooting & Common Issues
• Check the 24 VDC supply and verify that the voltage is within the specified range.
• Inspect the RS-485 Panel Bus wiring, especially the A and B communication terminals.
• Verify the master/slave configuration and RS-485 termination switches when multiple BUR-200 units are connected.
• If LEDs do not operate, check the mimic-panel wiring, series resistors, output assignments, and configured alarm connections.
• For monitored-input faults, inspect the input wiring and required resistor configuration.
• If intermittent communication occurs, inspect cable shielding, termination, connectors, and the daisy-chain arrangement.
🛡️ Safety Precautions
• Disconnect system power before installing or removing the BUR-200.
• Use appropriate ESD protection when handling the electronic module.
• Do not connect the 24 VDC supply to the RS-485 communication A/B terminals, as this can damage the communication circuitry.
• Verify polarity and terminal assignments before applying power.
• Fire-alarm equipment should be installed, tested, and commissioned by qualified personnel according to applicable fire-safety requirements.
• Do not bypass alarm-system monitoring or safety functions during normal operation.
📰 Product News
The BUR-200 remains documented as part of the Autroprime Interactive Fire Detection System. Autronica documentation identifies it as a Mimic Driver capable of controlling 32 LED indications and monitoring 8 inputs, with up to eight drivers connected to the panel bus. The documentation also identifies the maritime BUR-200M cabinet version, which incorporates the BUR-200 with 16 programmable relays.
❓ Common Questions & Answers
Q: What is the AUTRONICA BUR-200?
A: It is a Mimic Driver for the Autroprime Interactive Fire Detection System.
Q: How many LEDs can one BUR-200 control?
A: One BUR-200 can drive up to 32 LEDs on a mimic panel.
Q: How many monitored inputs are available?
A: The module provides 8 standard monitored inputs.
Q: What communication interface does it use?
A: The BUR-200 communicates through the RS-485 Panel Bus.
Q: How many BUR-200 modules can be connected?
A: Up to 8 Mimic Drivers can be connected to the panel bus, providing up to 256 outputs and 64 monitored inputs.
Q: What is the operating power supply?
A: The datasheet specifies 24 VDC with an operating range of 18–32 VDC. Maximum current consumption is specified as 25 mA.
Q: Can the BUR-200 be used in marine applications?
A: Yes. Autronica documentation describes the BUR-200M maritime cabinet version, which includes a BUR-200 and 16 programmable relays.
Q: How is the BUR-200 mounted?
A: The standard module is designed for TS-35 DIN-rail mounting.
🔧 Recommended AUTRONICA Models
- AUTRONICA BS-200 — Autroprime Fire Alarm Control Panel
- AUTRONICA BS-210 — Autroprime Operator Panel
- AUTRONICA BS-211 — Autroprime Repeater Panel
- AUTRONICA BV-210 — Autroprime Information Panel
- AUTRONICA BU-210 — Fire Brigade Panel
- AUTRONICA BU-211 — Local Alarm Storage Panel
- AUTRONICA BUR-200M — Maritime Mimic Cabinet
- AUTRONICA BUR-200 — Autroprime Mimic Driver
- AUTRONICA AutroSafe BS-310 — Fire Alarm Control Panel
- AUTRONICA AutroSafe BP-310 — AutroSafe Panel Module
