📌 Product Overview
The AUTRONICA KM-2 is a marine alarm and monitoring system designed for monitoring operating conditions and alarm signals in shipboard and industrial applications. The listed configuration includes KMB-201/F, KME-200/T, and associated KM-2 system components under reference 7251-008.0003.
The KM-2 system is associated with Autronica / J.I. Jenssen marine monitoring equipment and is commonly found in older vessel automation installations. The available configuration references include KM-2/15-1, KMB-201/F, KME-200/T, KMR-200/600C, KMC-220 and KMC-210.
The current referenced unit is listed as Used, with an approximate shipping weight of 4.4 kg. The available listing information identifies a 0–600°C monitoring range for the KM-2 configuration.
🔧 Technical Specifications
| Parameter | Specification |
|---|---|
| Brand | AUTRONICA / J.I. Jenssen |
| System | KM-2 |
| Product Type | Alarm and Monitoring System |
| Main Configuration | KMB-201/F, KME-200/T |
| Reference No. | 7251-008.0003 |
| Related Modules | KMR-200/600C, KMC-220, KMC-210 |
| Temperature Range | 0–600°C |
| Unit Type | System Unit |
| Approx. Weight | 4.4 kg |
| Condition | Used |
| Application | Marine / Shipboard Monitoring |
| Country of Origin | India as stated in the current listing |
The exact electrical ratings, input channels, alarm thresholds, and terminal configuration should be confirmed against the identification plates and the actual KM-2 configuration before installation. Different KM-2 assemblies can contain different combinations of monitoring modules.
⚙️ Main Components
KMB-201/F
The KMB-201/F is identified as one of the principal modules associated with the KM-2 monitoring system. It is listed together with KM-2/15-1 and other monitoring components in the system configuration.
KME-200/T
The KME-200/T is another KM-2 system component and is included in the configuration supplied under the referenced product listing.
KMR-200/600C
The KMR-200/600C is a related KM-2 monitoring unit. Separate listings identify it with the same 7251-008.0003 reference family and a 0–600°C range.
KMC-220 / KMC-210
KMC-220 and KMC-210 are also associated with the KM-2 system. The available configuration information identifies KMC-220 with a 600°C range and KMC-210 with an H-H limit designation.
🛳️ Typical Applications
The KM-2 system is suited to older marine automation installations where temperature and other operating conditions need to be monitored and alarmed.
Typical applications include:
- Main engine monitoring
- Auxiliary engine monitoring
- Engine-room alarm systems
- Marine machinery monitoring
- Temperature monitoring
- Shipboard equipment protection
- Retrofit and maintenance of legacy marine automation systems
- Replacement of obsolete KM-2 system components
For a vessel undergoing maintenance, matching the exact module type, wiring arrangement and existing KM-2 configuration is important. A physically similar module should not be treated as a direct replacement without checking the system documentation.
🔍 Identification References
The following references are useful when identifying this system:
- KM-2
- KM-2/15-1
- KMB-201/F
- KME-200/T
- KMR-200/600C
- KMC-220
- KMC-210
- KMA-200/Fbr
- 7251-008.0003
- 7251-031.0002
- 7251-004.0008
- 7251-005.0003
- 7252-017.0003
- 7252-013.0005
These numbers represent related KM-2 system references and should be used for identification rather than assuming they are interchangeable replacement part numbers.
❓ Frequently Asked Questions
Q1: What is the AUTRONICA KM-2?
The KM-2 is an alarm and monitoring system associated with Autronica / J.I. Jenssen marine automation equipment.
Q2: What components are included in this configuration?
The referenced configuration includes KMB-201/F and KME-200/T, with 7251-008.0003 used as an associated reference. Other KM-2 components such as KMR-200/600C, KMC-220 and KMC-210 are also associated with the system.
Q3: What is the temperature range?
The available listing information specifies a 0–600°C range for the KM-2 configuration.
Q4: Is this a new unit?
The referenced eBay listing identifies the unit as Used.
Q5: Can KMB-201/F be directly replaced by KMR-200/600C?
Not automatically. They are related KM-2 system components, but the exact electrical function, wiring and system position should be checked before substitution.
Q6: Is this suitable for marine equipment?
Yes. The KM-2 product family is associated with marine alarm and monitoring applications and is commonly encountered in shipboard automation equipment.
🔄 Related / Recommended AUTRONICA KM-2 Models
- AUTRONICA KM-2/15-1
- AUTRONICA KMB-201/F
- AUTRONICA KME-200/T
- AUTRONICA KMR-200/600C
- AUTRONICA KMC-220
- AUTRONICA KMC-210
- AUTRONICA KMA-200/Fbr
- AUTRONICA 7251-031.0002
- AUTRONICA 7251-004.0008
- AUTRONICA 7251-005.0003
These are related identification and configuration references within the KM-2 equipment family. They should not be treated as direct substitutes without confirming the original vessel system configuration.
🧰 Installation & Maintenance Notes
Before installation, compare the replacement unit with the existing equipment using the model number, terminal markings, module configuration and wiring documentation.
For a legacy marine system, it is good practice to:
- Photograph existing wiring before removal.
- Record all terminal and cable markings.
- Verify the module identification plate.
- Check the existing KM-2 system configuration.
- Inspect connectors and terminals for oxidation.
- Check the enclosure and PCB for corrosion or moisture damage.
- Confirm alarm and monitoring settings before returning the system to service.
- Perform a functional alarm test after installation.
Because this is older marine automation equipment, compatibility should be established at the system and module level, not only by comparing physical dimensions.
📦 Condition & Ordering Notes
The referenced unit is listed as Used and approximately 4.4 kg. Cosmetic condition, installed module combination, revision level and included accessories should be confirmed against the actual unit before purchase.
For replacement projects, please provide the existing unit’s nameplate or clear photos of the module labels and terminals. This makes it easier to confirm whether the available KM-2 assembly matches the installed marine alarm system.
