KEB AUTOMATION 19F6K13-3411 | COMBIVERT F6 Drive Controller

🔹 Product Introduction

The KEB Automation 19F6K13-3411 is a COMBIVERT F6 Compact drive controller designed for three-phase AC motor control applications. This configuration is rated for a 400 VAC three-phase input, 60 A output current, and 42 kVA output power, corresponding to a typical 30 kW motor rating. It supports EtherCAT and CAN communication, multiple encoder feedback types, motor temperature monitoring, integrated brake control, and Safe Torque Off (STO). The unit is air-cooled, built-in type, with an IP20 enclosure rating. KEB describes the COMBIVERT F6 as a drive controller combining frequency-inverter and servo-drive functions for a broad range of motor technologies.

KEB AUTOMATION 19F6K13-3411

📋 Product Datasheet

Parameter	Value
Brand	KEB Automation
Model	19F6K13-3411
Series	COMBIVERT F6
Product Name	Compact Drive Controller / Frequency Inverter
Place of Manufacture	Germany
Product Status	Original / Used or Surplus condition depends on actual unit
Dimensions	Approx. 170 × 340 × 261 mm
Weight	Verify from the physical unit; configuration dependent
Original Country of Origin	Germany
Power	400 VAC, 3-phase, 50/60 Hz; 42 kVA; 60 A output; typical 30 kW motor rating

The 19F6K13-3411 configuration supports a rated motor power of 30 kW, rated output power of 42 kVA, 60 A rated output current, 150% current regulator limit, and 180% cutoff current. Its maximum output frequency is listed as 599 Hz and rated switching frequency as 2 kHz.

🔧 Troubleshooting & Common Issues

• If the drive does not power up, verify the three-phase input voltage, input protection, terminals, and upstream disconnect.

• If an overcurrent fault occurs, check motor wiring, motor insulation, acceleration settings, load conditions, and mechanical blockage.

• If an overvoltage fault occurs during deceleration, inspect the DC bus condition and braking configuration.

• If the motor does not respond to commands, check the selected control mode, digital inputs, fieldbus communication, and enable/STO status.

• For encoder-related faults, verify encoder type, wiring, feedback supply, and the configured encoder interface.

• If the motor temperature signal is abnormal, inspect the KTY, PTC, or PT1000 sensor wiring and configuration.

• If EtherCAT or CAN communication fails, check cables, node configuration, communication parameters, and the connected controller.

⚠️ Safety Precautions

• Disconnect and isolate the AC power before installation, removal, or maintenance.

• Allow the DC-link capacitors to discharge according to the manufacturer’s specified waiting procedure before opening or servicing the drive.

• Follow applicable lockout/tagout procedures.

• Use appropriate ESD protection when handling the control electronics.

• Verify input voltage, phase configuration, motor rating, and wiring before energizing the drive.

• Do not bypass the integrated STO safety function or other protective circuits.

• Use appropriately rated cables, protective devices, grounding, and braking components.

• Perform controlled commissioning and motor-direction checks before placing the machine into normal operation.

📰 Product-Related News & Industry Context

KEB’s current COMBIVERT F6 platform combines frequency-inverter and servo-drive functions and covers a broad power range from 2.2 kW to 450 kW for 400 V-class systems. Depending on the device variant, F6 controllers support communication technologies including EtherCAT, PROFINET, EtherNet/IP, Modbus/TCP, POWERLINK, and VARAN, together with CAN and diagnostic interfaces.

The 19F6K13-3411 represents a 400 V, 42 kVA configuration within the F6 family. Its documented feature set includes EtherCAT/CAN communication, CiA 402 drive profile support, two-channel multi-encoder capability, 24 V/2 A brake control, KTY/PTC/PT1000 motor-temperature input, integrated brake transistor, and STO safety functionality.

❓ Q&A

Q: What is the KEB 19F6K13-3411?

A: It is a KEB Automation COMBIVERT F6 Compact drive controller for three-phase AC motor applications.

Q: What is its motor power rating?

A: The listed configuration has a typical rated motor power of 30 kW for a 2/4-pole motor at 50/60 Hz.

Q: What is the output current?

A: The rated output current is 60 A.

Q: What is the input voltage?

A: The specified input is 400 VAC, three-phase, 50/60 Hz.

Q: What communication interfaces are available?

A: This configuration is listed with EtherCAT and CAN communication. The wider F6 family supports additional communication options depending on the control-card and device variant.

Q: Does it support encoder feedback?

A: Yes. The 19F6K13-3411 is listed with a two-channel multi-encoder interface supporting compatible feedback configurations.

Q: What motor-temperature sensors are supported?

A: The listed configuration supports KTY, PTC, and PT1000 motor-temperature sensors.

Q: Does it have a safety function?

A: Yes. The configuration includes Safe Torque Off (STO).

Q: What is the enclosure rating?

A: The listed configuration has an IP20 protection rating and an air-cooled built-in design.

Q: Is 19F6K13-3411 discontinued?

A: The available KEB material confirms that the COMBIVERT F6 family remains an active product platform, but the exact production status of this specific 19F6K13-3411 ordering configuration should be verified from its nameplate and current KEB documentation.

⭐ Recommended KEB Automation Models