Description
🔹 Product Description
The GE DS200PCCAG6A, also identified as DS200PCCAG6ACB, is a PCCA Power Connect Board designed for GE Mark V drive and turbine control applications. The board provides the electrical interface between the drive control circuitry and the SCR power bridge, handling gate-drive pulse transformer connections and power conversion interfaces. The Group 6 configuration is associated with J, K, and M frame applications and is compatible with the DCFB power supply board. This version uses a specific Group 6 hardware configuration with six installed pulse transformers and no configuration jumpers. The supplied condition is New – Open Box, making it suitable for replacement, maintenance, or spare inventory.
🔹 Product Datasheet
| Parameter | Specification |
|---|---|
| Brand | General Electric (GE) |
| Model | DS200PCCAG6A / DS200PCCAG6ACB |
| Series | Mark V DS200 |
| Product Name | Power Connect Board / Power Connect Card |
| Functional Acronym | PCCA |
| Place of Manufacture | USA |
| Product Status | New – Open Box |
| Dimensions | Approx. 3.2 × 10.7 × 13 cm |
| Weight | Approx. 0.3–0.75 kg |
| Application | SCR Power Bridge / Drive Interface |
| Power | System-dependent |
| Discontinued | Legacy product; current OEM availability should be verified |
🔹 Key Features
• Designed for GE Mark V drive control systems
• Interfaces drive control circuitry with the SCR power bridge
• Supports gate-drive pulse transformer connections
• Group 6 configuration for J, K, and M frame applications
• Compatible with the DCFB Power Supply Board
• Uses six installed pulse transformers in the Group 6 configuration
• Provides multiple plug connections for forward and reverse SCR gate signals
• Designed for high-power drive and power-conversion applications
• DS200PCCAG6ACB represents the detailed board revision associated with the base DS200PCCAG6A model
• Suitable for replacement and maintenance of legacy Mark V equipment
🔹 Q&A
Q: What is the DS200PCCAG6A used for?
A: It is a Power Connect Board used to interface GE Mark V drive control circuitry with the SCR power bridge.
Q: What is the difference between DS200PCCAG6A and DS200PCCAG6ACB?
A: DS200PCCAG6A identifies the base PCCA board, while DS200PCCAG6ACB identifies the specific board assembly and revision configuration.
Q: What does PCCA stand for?
A: PCCA refers to the Power Connect Card/Board functional designation.
Q: Which drive frames are associated with the Group 6 version?
A: The Group 6 configuration is associated with J, K, and M frame applications.
Q: Does this board use configuration jumpers?
A: The Group 6 version is documented as a jumper-less configuration.
Q: What condition is this listing?
A: The supplied unit is listed as New – Open Box. Packaging may have been opened for inspection or handling.
Q: What safety precautions are required?
A: The Mark V power section can contain hazardous AC and DC voltages. Fully de-energize the equipment, isolate incoming power, allow the DC bus to discharge, and verify zero voltage before handling the board.
🔹 Recommended GE Models
- DS200PCCAG1A – Power Connect Board
- DS200PCCAG2A – Power Connect Board
- DS200PCCAG3A – Power Connect Board
- DS200PCCAG4A – Power Connect Board
- DS200PCCAG5A – Power Connect Board
- DS200PCCAG7A – Power Connect Board
- DS200PCCAG8A – Power Connect Board
- DS200PCCAG9A – Power Connect Board
- DS200PCCAG10A – Power Connect Board
- DS200DCFBG1A – DC Power Supply Board
- DS200CDBAG1A – Contactor Driver Board
- DS200CPCAG1A – Contactor Pilot Board
- DS200TCEAG1B – Mark V Terminal Board
- DS200CTBAG1A – Analog Termination Board
- DS200TCCAAG1A – Analog I/O Board
