Description
⚙️ Product Description
The GE IS200DAMEG1A is an Innovation Series DAME Gate Drive Interface Board designed for GE low-voltage drive systems. The associated full identification IS200DAMEG1ADB represents a specific hardware revision/configuration. Unlike the DAMA, DAMB, and DAMC variants that provide gate-signal amplification, the DAME board functions as a non-amplifying interface between the IS200BPIA Bridge Personality Interface board and the IGBT power module. The DAME version is associated with a 65-frame drive and uses a single IGBT module containing the six IGBTs required for the three-phase bridge. The board provides three phase-related interfaces, identified as APL, BPL, and CPL, and is physically integrated with the IGBT module. The board has no separate power input, fuses, test points, or user-configurable hardware. Because the board is soldered to the IGBT module, the board and IGBT assembly should be treated as a matched replacement unit.
📋 Product Datasheet
| Parameter | Specification |
|---|---|
| Brand | General Electric (GE) |
| Model | IS200DAMEG1A |
| Full / Alternate Marking | IS200DAMEG1ADB |
| Series | Innovation Series |
| Functional Acronym | DAME |
| Product Name | Gate Drive Interface Board with IGBT |
| Product Type | Gate Drive / IGBT Interface Board |
| Drive Frame Rating | 65 Frame |
| IGBT Module | Powerex CM100TF-28H |
| IGBT Configuration | One module containing 6 IGBTs |
| Phases Supported | 3-Phase |
| Boards per Drive | 1 |
| BPIA Interface | APL / BPL / CPL |
| Amplification | None — passive interface |
| Separate Power Input | None |
| Fuses | None |
| Test Points | None |
| LED Indicators | None |
| Place of Origin | USA / GE Industrial Systems |
| Product Status | Used / Clean and Tested — verify actual stock condition |
| Dimensions | Verify actual board/IGBT assembly dimensions |
| Weight | Verify actual packed weight |
| Power | No separate board power input; gate-drive signals originate from the BPIA |
| Discontinued | Legacy Innovation Series component |
🔧 Functional Features
• Interfaces the control rack with the IGBT power-switching module
• Designed for GE Innovation Series low-voltage drives
• DAME configuration for 65-frame drive applications
• Non-amplifying gate-drive interface design
• Three phase interfaces: APL, BPL, and CPL
• One board supports all three phases through the integrated IGBT module
• Uses a single CM100TF-28H IGBT module containing six IGBTs
• No separate board-level power supply is required
• Board is physically integrated with the IGBT module
• Intended for drive maintenance and replacement applications
❓ Frequently Asked Questions
Q1: What is the GE IS200DAMEG1A used for?
A: It provides the gate-drive interface between the IS200BPIA Bridge Personality Interface board and the IGBT power module in compatible GE Innovation Series low-voltage drives.
Q2: Does the DAME board amplify the gate signal?
A: No. The DAME variant is a non-amplifying interface board. Its primary function is to route and interface the gate-control signals between the control rack and IGBT module.
Q3: What drive frame is IS200DAMEG1A designed for?
A: The DAME configuration is associated with 65-frame Innovation Series drives.
Q4: How many DAME boards are used in one drive?
A: One DAME board is used for the three-phase drive when paired with the specified single IGBT module containing all six IGBTs.
Q5: What are APL, BPL, and CPL?
A: These are the three phase-related interface connections between the DAME board and the BPIA/control circuitry, corresponding to phases A, B, and C.
Q6: Does the board have its own power input?
A: No. The DAME board does not require a separate power input for amplification because it functions as a passive interface.
Q7: Can the DAME board be replaced separately from the IGBT?
A: The board is soldered to the IGBT module, so the board and IGBT should be treated as an integrated assembly for replacement. Verify the complete assembly identification before ordering.
🛠️ Troubleshooting & Safety
Before diagnosing the DAME assembly, check the BPIA board, phase cables, IGBT module, mechanical connections, and drive fault indications. Inspect the assembly for cracked solder joints, discoloration, damaged terminals, or signs of overheating. Because the assembly is connected directly to the drive’s high-voltage power section, do not remove or install it while energized. Lock out and isolate the drive, verify the DC bus has discharged, and confirm zero hazardous voltage before handling the IGBT/DAME assembly. Use appropriate ESD protection when working with the IGBT module and control electronics.
⭐ Recommended Same-Brand GE Models
- GE IS200DAMAG1B — Innovation Series IGBT / Gate Drive Assembly
- GE IS200DAMBG1A — Innovation Series Gate Driver Board
- GE IS200DAMCG1A — Innovation Series Gate Drive Amplifier Board
- GE IS200DAMDG1A — Innovation Series Gate Drive Interface Board
- GE IS200DAMDG2A — Innovation Series Gate Drive Interface Board
- GE IS200BPIA — Bridge Personality Interface Board
- GE IS200BPIAG1A — Innovation Series Bridge Personality Interface Board
- GE IS200BPIBG1A — Phase Logic Interface Board
- GE IS200DSFCG1A — Driver / Shunt Feedback Board
- GE IS200DSPXH1D — Drive DSP Control Board
- GE IS200GBLIH1A — Gate Bus Logic Interface Board
- GE IS200GBLIG1A — Gate Bus Logic Interface Board
- GE IS200IGDMG1A — Innovation Series Gate Drive Module
- GE IS200CABPG1B — Control Assembly / IGBT Backplane
- GE IS200CPFXG1A — Phase Leg Flash Protection Board
