⚙️ Product Introduction
The ABB CP430T-ETH, part number 1SBP260196R1001, is a touchscreen operator panel designed for industrial machine and process-control applications. It provides an HMI interface between operators and connected automation equipment.
The panel can be used to display operating conditions, alarms, process values, machine status, and control commands. Its Ethernet interface allows integration with compatible PLC and industrial control systems.
🖥️ Operator Interface
The CP430T-ETH provides a graphical touchscreen interface for machine operation and process monitoring. Operators can use configured screens to monitor variables, acknowledge alarms, enter setpoints, and issue control commands.
The panel is intended for installation in a control cabinet or machine operator station where a local HMI is required.
🏭 Typical Applications
• Industrial machine control
• PLC operator interfaces
• Process monitoring
• Factory automation
• Packaging machinery
• Material handling systems
• Control cabinets
• Production-line monitoring
• OEM machine applications
📋 Product Datasheet
| Parameter | Specification |
|---|---|
| Manufacturer | ABB |
| Model | CP430T-ETH |
| Part Number | 1SBP260196R1001 |
| Product Type | Touchscreen Control Panel / HMI |
| Series | CP400 Series |
| Display Type | TFT Color LCD |
| Display Size | 5.7 in |
| Touchscreen | Resistive Touch |
| Resolution | 320 × 240 pixels |
| Communication | Ethernet |
| Ethernet Interface | 10/100 Mbps |
| Serial Communication | RS-232 / RS-485* |
| Supply Voltage | 24 VDC |
| Power Consumption | Approx. 10 W* |
| Front Protection | IP65* |
| Installation | Panel Mount |
| Operating Temperature | 0°C to +50°C* |
| Storage Temperature | -20°C to +70°C* |
| Dimensions | Approx. 190 × 150 × 60 mm* |
| Weight | Approx. 0.8 kg* |
| Country of Origin | Italy* |
*Specifications can vary by hardware revision and exact CP430T-ETH configuration. Verify the nameplate and applicable ABB documentation before installation.
⚡ Key Features
• 5.7-inch color touchscreen
• 320 × 240 display resolution
• Ethernet communication
• 24 VDC industrial power supply
• Panel-mounted HMI design
• Graphical machine-operation interface
• Alarm and status visualization
• Suitable for PLC-based automation systems
🔌 Communication Function
The CP430T-ETH is designed to communicate with compatible automation controllers through its available communication interfaces. Ethernet can be used for connection to industrial control networks, while serial interfaces may be available for compatible devices depending on the configuration.
Communication parameters should be configured according to the PLC, controller, or automation equipment connected to the panel.
🛠️ Installation Notes
Before installation, verify the complete part number 1SBP260196R1001, display configuration, connector arrangement, supply voltage, and communication requirements.
Install the panel in a suitable control-cabinet cutout and secure it according to the mechanical installation requirements. Provide a clean 24 VDC supply and ensure that the protective earth and communication wiring are correctly connected.
After power-up, verify the display, touchscreen response, communication status, configured HMI screens, alarms, and PLC data exchange.
⚙️ Commissioning Check
• Confirm 24 VDC supply
• Check power polarity
• Inspect Ethernet connection
• Verify PLC communication
• Confirm touchscreen operation
• Check HMI screen configuration
• Test alarm display
• Verify operator commands
• Confirm stable data refresh
⚠️ Compatibility Notice
The CP430T-ETH is an HMI/operator panel rather than a standalone PLC controller. Its actual functionality depends on the loaded HMI application and the connected automation controller.
For replacement applications, match the complete ABB part number, hardware revision, communication interfaces, display characteristics, and existing HMI project configuration.
📦 Product Identification
Brand: ABB
Model: CP430T-ETH
Part Number: 1SBP260196R1001
Product Type: Touchscreen Control Panel
Display: 5.7-inch TFT Color LCD
Resolution: 320 × 240
Communication: Ethernet
Supply: 24 VDC
Application: Industrial HMI / Machine Control
