B&R 5C2001.16 | 5D2500.41 Display Operating Panel

📖 Product Introduction

The B&R 5C2001.16 / 5D2500.41 is a display operating panel used as an HMI interface in B&R industrial automation systems. The 5C2001.16 is identified as the computer/display unit, while 5D2500.41 is the associated display operating panel designation. Available identification records also associate this equipment with the B&R IPC 2001 platform.

The specific unit in the supplied listing is marked 5C2001.16 REV I0 and 5D2500.41 REV G0 and is offered as a used runner/take-out unit with a video available for condition checking.

The 5D2500.41 is a 24 VDC industrial display/control panel. A matching G0 unit has been documented with 5C2001.16, IPC 2001 identification, and an Austria manufacturing marking.

📋 Product Datasheet

Parameter	Value
Brand	B&R Automation
Model	5C2001.16 / 5D2500.41
Series	B&R IPC 2001
Product Name	Display Operating Panel / HMI
Display Panel P/N	5D2500.41
Computer/Display P/N	5C2001.16
Revision	5C2001.16 Rev. I0 / 5D2500.41 Rev. G0
Controller Platform	HMI / Industrial PC
Rated Supply	24 VDC
Country of Origin	Austria
Condition	Used / Runner Take-Out
Weight	Approx. 5.88 kg*

• The approximately 5.88 kg figure is documented for a 5D2500.41 / 5C2001.16 assembly, although the exact weight can vary by revision and installed components.

⚠️ Exact display size, resolution, dimensions, CPU configuration, memory, power consumption, and communication interfaces should be confirmed from the physical nameplate and exact revision. Different revisions of 5D2500.41 are present in the market, including B0, D0 and G0 versions.

 

⚙️ Operating Guidelines

🔹 Confirm both identification numbers before installation: 5C2001.16 and 5D2500.41.

🔹 Check the revision markings carefully because different revisions are available.

🔹 Inspect the LCD/display surface, front keys or controls, housing, connectors, mounting points, and rear interface.

🔹 Verify the 24 VDC supply before connecting power.

🔹 Confirm that the panel is compatible with the existing B&R IPC 2001 configuration.

🔹 Check communication and application software after startup.

🔹 Do not change BIOS, operating-system, or application settings unless the system documentation permits it.

🔹 When replacing an existing unit, record the original wiring and configuration before removing it.

 

🛠️ How to Use

1. 🔍 Confirm the complete model and revision markings.
2. 🧰 Inspect the panel and connectors for physical damage.
3. 🔌 Verify the 24 VDC power supply and polarity.
4. 🖥️ Mount the panel securely in the designated control cabinet or operator station.
5. 🔗 Connect the power and communication cables.
6. ⚡ Energize the associated B&R system.
7. ⏳ Allow the IPC/HMI system to complete initialization.
8. 📺 Check the display and operator interface.
9. 📡 Verify communication with the PLC or automation controller.
10. ✅ Test the required operator functions before returning the machine to production.

 

🔌 Power-On Sequence

1. 🔍 Check the panel and wiring.
2. ⚡ Measure and verify the available 24 VDC supply.
3. 🔗 Connect all required cables.
4. 🖥️ Power the B&R IPC/HMI system.
5. ⏳ Wait for the operating system and HMI application to initialize.
6. 📡 Confirm communication with the connected control system.
7. 🚨 Check for system or application alarms.
8. ✅ Verify that the HMI displays valid machine data.

 

⛔ Power-Off Sequence

1. Notify the machine operator or maintenance engineer.
2. Place the controlled machine in a safe condition.
3. Exit the HMI application normally if required.
4. Shut down the IPC system according to the configured operating procedure.
5. Isolate the 24 VDC supply after the system has safely shut down.
6. Wait for the display and internal electronics to fully de-energize.
7. Disconnect cables only after power has been isolated.

⚠️ Avoid abruptly removing DC power from an operating industrial PC unless the machine procedure specifically requires an emergency shutdown.

 

📘 Product Usage Notes

The 5D2500.41 is listed as a B&R display control/operating panel, while 5C2001.16 is identified as the associated B&R PC/display component. The combination is also associated with the IPC 2001 platform.

One documented G0 assembly carries the markings 5D2500.41 Rev. G0, 5C2001.16 Rev. K0, IPC 2001, and Made in Austria. Because the supplied listing specifies 5C2001.16 Rev. I0, the exact revision of the physical item should be checked carefully before purchasing or replacing another unit.

For replacement work, matching the complete part number and revision is preferable to matching the front appearance alone.

 

❓ Common Questions & Answers

Q: What is the B&R 5D2500.41?
A: It is a B&R display operating/control panel used as an HMI interface in industrial automation equipment.

Q: What is 5C2001.16?
A: It is the associated B&R IPC/display computer designation used with the 5D2500.41 panel assembly.

Q: Is this an HMI?
A: Yes. The 5D2500.41 is identified as an HMI/display operating panel and is associated with the B&R IPC 2001 platform.

Q: What is the power supply?
A: Available technical identification for this panel specifies +24 VDC, with GND and ground connections.

Q: What is the country of origin?
A: Austria is listed for the B&R 5D2500.41 assembly, and a matching G0 identification record states “Made in Austria.”

Q: Is Rev G0 interchangeable with Rev D0 or Rev B0?
A: Do not assume direct interchangeability. Different revisions exist, and the system configuration, connectors, software, and hardware revision should be checked before substitution.

Q: Can the panel be used with any B&R PLC?
A: No. Compatibility depends on the complete B&R IPC/HMI architecture, communication configuration, application software, and installed hardware.

Q: Is the supplied unit new?
A: No. The referenced listing identifies it as used and describes it as a runner/take-out unit.

Q: What should I check before purchasing?
A: Check the exact 5C2001.16 revision, 5D2500.41 revision, connectors, display condition, mounting dimensions, power input, and compatibility with the existing B&R system.

 

⭐ Recommended Other B&R Series / Models

1. B&R 5C2001.01 — IPC / Industrial PC
2. B&R 5C2002.02 — Industrial PC
3. B&R 5D2500.41 — Display Operating Panel
4. B&R 5AP980.1505-K22 — Automation Panel
5. B&R 5AP980.1505-K02 — Automation Panel
6. B&R 5AP920.1043-01 — Automation Panel
7. B&R 5AP1130.101E-000 — Automation Panel
8. B&R 5P62 — Industrial PC / Automation PC
9. B&R 5P81 — Industrial PC
10. B&R 5MMUSB Series — Industrial USB Storage Modules

The B&R 5C2001.16 and 5D2500.41 are also listed within broader B&R industrial PC and panel product inventories, alongside 5C2001.01, 5C2002.02 and other B&R automation hardware.