🔧 Product Overview
The Yamatake-Honeywell 511-0020 C22 is an analog output module associated with the TVSR3000 control platform. It is designed to provide analog signal output for industrial control applications where process values must be transmitted from the control system to field devices.
The module is identified with the model 511-0020 C22 and version H03 S03. Available identification information also references TVSR3000, product number Tvs70-eeeeeek2-201, and VTC24SA-related components.
This type of module can be used in industrial automation environments for interfacing control logic with analog field equipment such as actuators, valves, regulators, and other process-control devices. The exact output configuration should be confirmed against the system documentation and the module nameplate before installation.
⚙️ Key Features
- Yamatake-Honeywell industrial automation module
- Model: 511-0020 C22
- Analog output module
- TVSR3000 system identification
- Version: H03 S03
- Product No.: Tvs70-eeeeeek2-201
- Designed for industrial process-control applications
- Suitable as a replacement or spare module when the existing part number matches
- Used condition according to the referenced listing
📋 Product Datasheet
| Parameter | Specification |
|---|---|
| Brand | Yamatake-Honeywell |
| Model | 511-0020 C22 |
| MPN | 511-0020 C22 |
| Product Type | Analog Output Module |
| System | TVSR3000 |
| Version | H03 S03 |
| Product No. | Tvs70-eeeeeek2-201 |
| Related Module | 511-9930 |
| Related Base | 511-9993 Expander Half Base |
| Slot Configuration | 7-Slot system reference |
| Country of Manufacture | Japan |
| Condition | Used |
| Weight | Approx. 11.2 kg as listed |
| Application | Industrial Automation / Process Control |
The listing information also references 511-9930 and 511-9993 as associated system components. Because configuration details can vary by installation, the actual nameplate and existing system configuration should be checked before replacement.
🏭 Operating Function
The 511-0020 C22 functions as an analog output interface between the control system and connected field equipment.
In a typical control loop, the controller determines the required process output and sends the corresponding command through the analog output module. The field device then uses this signal to adjust a process variable such as flow, pressure, temperature, or valve position.
For replacement work, matching the exact model, revision, terminal arrangement, and system configuration is important. Do not assume that another 511-series module is electrically interchangeable simply because it has a similar appearance.
🛠️ Installation & Maintenance Notes
Before installation
- Verify the complete part number: 511-0020 C22.
- Compare the version marking with the removed module.
- Check the module and connector for oxidation, contamination, or physical damage.
- Confirm the rack/base configuration.
- Record existing wiring before removing the original module.
During installation
- Power down the relevant equipment according to the plant maintenance procedure.
- Use appropriate ESD protection when handling the module.
- Make sure the module is correctly seated in its designated position.
- Confirm terminal wiring before applying power.
- Check output behavior after system startup.
Maintenance
Keep the module clean and dry, and avoid unnecessary handling of the circuit board. For a replacement module, functional testing should be performed with the actual control system or an appropriate test setup before returning the equipment to normal operation.
❓ Common Questions
Q: What is the model number?
A: The model is Yamatake-Honeywell 511-0020 C22.
Q: What type of module is it?
A: It is identified as an analog output module.
Q: Which system is it associated with?
A: The available identification information associates it with the TVSR3000 platform.
Q: What version is shown in the listing?
A: The listed version is H03 S03.
Q: Is the module new?
A: No. The referenced listing identifies the item as Used.
Q: What should I verify before purchasing?
A: Confirm the complete model number, version, connector arrangement, system configuration, and nameplate information against your existing module.
Q: Can another 511-series module directly replace it?
A: Not necessarily. Replacement should be based on the exact part number and system configuration rather than the series number alone.
🔄 Recommended Yamatake-Honeywell Models
If you are maintaining older Yamatake-Honeywell industrial control equipment, the following models may also be relevant:
- Yamatake-Honeywell 511-4550 Input Module
- Yamatake-Honeywell 511-5576 Control Module
- Yamatake-Honeywell 511-9930 Parallel I/O Module
- Yamatake-Honeywell 511-9993 Expander Half Base
- Yamatake-Honeywell J-MSC10 Control Module
- Yamatake-Honeywell J-UDM00 Director Module
- Yamatake-Honeywell J-PIM00 Control Module
- Yamatake-Honeywell J-SIP50-22 Controller
- Yamatake-Honeywell J-SMS80-2X Analog Input Module
- Yamatake-Honeywell J-SSD50-22 Analog Input Module
These are examples of related Yamatake-Honeywell automation components; they should not be treated as direct substitutes for the 511-0020 C22 without checking system compatibility.
📦 Suitable Applications
The 511-0020 C22 is a practical spare-part candidate for maintenance of legacy Yamatake-Honeywell control equipment where the existing installation uses the same module designation.
For purchasing or replacement, the safest approach is to match the model, revision/version, product number, and physical interface with the existing module before installation.
