Description
🔹 Product Description
The GE Multilin SR469-P5-LO-A20 is a microprocessor-based motor management relay designed to provide comprehensive protection, monitoring, and control for medium- and large-sized industrial motors. Part of the GE Multilin 469 series, it integrates electrical protection functions, motor operating measurements, alarm management, and trip logic into a single device.
The SR469-P5-LO-A20 features 5 A phase current transformer inputs, low-range control power, and four configurable 4–20 mA analog outputs. Its protection functions include overload, phase current unbalance, ground fault, voltage and frequency protection, load loss detection, and other motor-related protective functions. The relay also supports RTD temperature monitoring and programmable protection settings, depending on the installed configuration.
This relay is suitable for industrial motor control centers, pumps, fans, compressors, conveyors, and other motor-driven equipment. Before replacing an existing relay, verify the control power supply, CT secondary rating, analog output configuration, communication requirements, and protection settings.

🔹 Product Parameters
🏷️ Brand: General Electric (GE) / GE Multilin
🔢 Model: SR469-P5-LO-A20
🧩 Series: Multilin 469 Motor Management Relay
⚙️ Product Name: Motor Management and Protection Relay
🌍 Place of Manufacture: Verify the individual unit’s nameplate; the 469 series has been manufactured in Canada.
📦 Product Status: Depends on the specific unit; confirm whether it is new, surplus, open-box, or used.
📏 Dimensions: Approximate packaged dimensions vary by enclosure and accessories; consult the installation manual for panel cutout and mounting dimensions.
⚖️ Weight: Approximately 1.36 kg (3 lb) reported for the relay by one supplier; confirm the actual unit and whether accessories are included.
🔌 Power Requirements: 20–60 V DC or 20–48 V AC at 48–62 Hz.
🛠️ Discontinued: Confirm current lifecycle and support status with the manufacturer or an authorized supplier.
⚡ Phase CT Input: 5 A secondary.
📊 Analog Outputs: Four 4–20 mA outputs.
🌡️ Temperature Monitoring: Supports compatible RTD temperature sensors, subject to configuration.
🛡️ Protection Functions: Motor overload, ground fault, current unbalance, voltage and frequency protection, and additional configurable motor protection functions.
🖥️ Display: Standard display configuration for this model designation; verify the actual front panel.
🔗 Communications: Front-panel RS232 and rear communications interfaces depend on the specific configuration.
🔹 Frequently Asked Questions (Q&A)
❓ What is the GE SR469-P5-LO-A20 used for?
It protects and manages industrial motors by monitoring electrical operating conditions, detecting faults, and initiating alarms or trips when configured protection thresholds are exceeded.
❓ What does P5-LO-A20 mean?
P5 identifies 5 A phase CT secondary inputs, LO specifies low-range control power, and A20 identifies four 4–20 mA analog outputs.
❓ Can this relay operate on a 24 V DC supply?
Yes, 24 V DC falls within the specified low-range DC control power range. Confirm the actual supply voltage, wiring polarity, and installation requirements before energizing the unit.
❓ Does the SR469-P5-LO-A20 include Ethernet?
Ethernet is not indicated by the base model designation alone. Options such as the T suffix are associated with enhanced Ethernet configurations. Verify the full part number before ordering.
❓ Can it directly replace another Multilin 469 relay?
Not necessarily. Check CT ratings, control power, analog outputs, display options, communications, firmware, and existing protection settings before replacing the relay.
❓ What should be checked before purchasing?
Verify the complete model number, serial number, nameplate, physical condition, terminal connections, testing records, and supplier warranty. For used units, request confirmation that the relay has been tested.
🔹 Recommended GE Multilin Models
The following models belong to the GE Multilin 469 motor protection family or are related motor-protection options. Confirm exact configurations and compatibility before selecting a replacement.
- 469-P1-LO-A20 — Motor management relay with 1 A phase CT inputs and low-range control power.
- 469-P5-LO-A20-E — Motor management relay with 5 A CT inputs and enhanced display.
- 469-P5-LO-A20-T — Motor management relay with 5 A CT inputs and Ethernet option.
- 469-P5-LO-A20-H — Low-power motor relay variant with harsh-environment coating; verify the full ordering code.
- 469-P5-HI-A20 — Motor management relay with 5 A CT inputs and high-range control power.
- 469-P5-HI-A20-E — High-power relay variant with enhanced display.
- 469-P5-HI-A20-T — High-power relay variant with Ethernet option.
- 469-P1-HI-A20 — Motor management relay with 1 A CT inputs and high-range control power.
- 469-P1-LO-A1 — Motor management relay with 1 A CT inputs and 0–1 mA analog outputs.
- 469-P5-LO-A1 — Motor management relay with 5 A CT inputs and 0–1 mA analog outputs.
- SR469-P5-LO-A20 — Cased SR469 motor management relay configuration.
- SR469-P5-LO-A20-E — Cased motor management relay with enhanced display.
- SR469-P5-LO-A20-T — Cased motor management relay with Ethernet option.
- SR469-P5-HI-A20 — Cased motor management relay with 5 A CT inputs and high-range control power.
- SR469-P5-HI-A20-T — Cased motor management relay with high-range control power and Ethernet option.
These models are related product suggestions, not guaranteed drop-in replacements. Check the complete order code and GE Multilin documentation before purchase or installation.

