KONTRON 3136518-13 | 7315-i Industrial Computer

Product Overview

The KONTRON 3136518-13 is a 7315-i Industrial Computer, Revision A1, designed for industrial computing and control environments. The unit is identified by Kontron part number 3136518-13 and is listed with a 100–240 VAC input, 50/60 Hz frequency, and maximum current rating of 6.3 A.

The 7315-i platform is suitable for maintaining legacy industrial computer installations where replacement of the complete computer is preferred over rebuilding individual internal components. The available product records identify the unit as assembled in the USA and show a listed weight of approximately 17.65–17.80 kg.

For replacement applications, the complete part number, revision, power requirements, and installed hardware configuration should be compared with the original unit before commissioning.

Key Features

Kontron 7315-i Industrial Computer
Part Number 3136518-13
Revision A1
100–240 VAC input
50/60 Hz operation
6.3 A maximum current rating
Assembled in USA
Industrial-grade computer platform
Approx. 17.65–17.80 kg listed weight
Suitable for industrial and legacy-system replacement applications

Technical Datasheet

Parameter	Specification
Brand	KONTRON
Model	7315-i
Part Number	3136518-13
Revision	A1
Product Type	Industrial Computer
Input Voltage	100–240 VAC
Frequency	50/60 Hz
Maximum Current	6.3 A
Assembly	USA
Listed Weight	Approx. 17.65–17.80 kg

The 6.3 A maximum current and 100–240 VAC / 50–60 Hz input are specifically listed for the 7315-i configuration associated with part number 3136518-13.

Typical Applications

The 7315-i can be considered for industrial environments where a dedicated computer platform is used as part of a control, monitoring, data acquisition, or equipment-management system.

Potential applications include:

Industrial control systems
Automation equipment
Process monitoring
Machine control
Marine and offshore equipment
Legacy industrial computer systems
Replacement and spare-parts inventory
Industrial data-processing applications

The exact processor, memory, storage, operating system, communication interfaces, and installed expansion hardware should be verified from the actual unit because these details are not established by the 3136518-13 part number alone in the available public records.

Installation & Configuration

Before replacing an existing Kontron industrial computer, record the complete configuration of the installed unit.

Shut down the controlled system using the approved procedure.
Disconnect and isolate the 100–240 VAC supply.
Record all connected cables and interface locations.
Verify the 7315-i and 3136518-13 markings.
Confirm Revision A1 where applicable.
Compare installed storage, memory, interface cards, and connectors.
Install the replacement unit using the original mounting arrangement.
Reconnect cables according to the recorded configuration.
Verify the AC input requirements before energizing.
Start the computer and check the operating system and connected equipment.
Confirm communication with the associated control or monitoring system.
Perform a controlled functional test before returning the equipment to normal service.

Do not assume that another 7315-series computer is a direct replacement without checking its complete hardware configuration.

Maintenance & Inspection

For a spare or replacement 3136518-13, recommended inspection includes:

Check the chassis for deformation or impact damage.
Inspect AC input connections.
Check connectors for corrosion or bent contacts.
Inspect internal boards for dust or contamination.
Check cooling fans and ventilation paths.
Inspect storage devices and memory where accessible.
Record BIOS, hardware, and software information before changes.
Verify interface cards against the original system configuration.
Check for loose internal cables or mounting hardware.
Perform a controlled power-up test before field installation.

For long-term storage, use an ESD-safe and dry environment and retain the original identification labels.

Replacement Notes

The primary identification combination is:

KONTRON 7315-i / 3136518-13 / Rev. A1

Some marketplace listings show the same part number with slightly different listed weights, approximately 17.65 kg and 17.80 kg. This difference is minor and may reflect different configurations, accessories, or weighing methods.

When purchasing a replacement, match the complete part number and revision rather than relying only on the “7315-i” model designation.

Because industrial computers can contain system-specific storage, memory, operating software, and expansion hardware, those configuration details should be checked against the original installation.