B&R 4PP220.1043-75 | Power Panel PP220

  📌 Product Introduction The B&R 4PP220.1043-75 is a Power Panel PP220 operator panel combining a 10.4-inch VGA color TFT display with a resistive touch screen and embedded controller hardware. B&R specifies 64 MB SDRAM, 256 kB battery-backed SRAM, a Type I CompactFlash slot, Ethernet 10/100, RS232, two USB ports, and one aPCI slot. The…

CUTLER HAMMER W200M4CFC | Motor Starter

  ⚙️ Product Introduction The CUTLER HAMMER W200M4CFC is an Advantage Series full-voltage, non-reversing motor starter designed for three-phase industrial motor control. It is a NEMA Size 4 starter with three poles, a 120 VAC control coil at 60 Hz, and a 135 A continuous current rating. The unit is rated up to 600 VAC…

BEIJER X2 MARINE15-B2 | Marine HMI Touch Panel 640001605

  📌 Product Introduction The BEIJER X2 MARINE15-B2 is a marine-oriented HMI touch panel from the Beijer X2 marine family. The referenced unit is identified with Alfa Laval P/N 640001605, Rev 3. Product listings identify the 640001605 unit specifically as an X2 MARINE15-B2 touch panel, and Alfa Laval is associated with this particular part-number configuration.…

B&R 5C2001.16 | 5D2500.41 Display Operating Panel

📖 Product Introduction The B&R 5C2001.16 / 5D2500.41 is a display operating panel used as an HMI interface in B&R industrial automation systems. The 5C2001.16 is identified as the computer/display unit, while 5D2500.41 is the associated display operating panel designation. Available identification records also associate this equipment with the B&R IPC 2001 platform. The specific…

WOODWARD 8234-087 | 507 Digital Marine Control

  📌 Product Introduction The WOODWARD 8234-087 is a 507 Digital Marine Control designed for marine propulsion and engine-control applications. The 507 is part of Woodward’s 500-series digital control platform and was developed for controlling multiple engine or turbine propulsion drives in marine service. The referenced unit is identified as Woodward 507 Digital Marine Control,…

ROCKWELL S26-2B+R/SFT REM+MS CON 90 DEG | P/N 43-0586 | MODEL 001

⚙️ Product Introduction The ROCKWELL S26-2B+R/SFT REM+MS CON 90 DEG, P/N 43-0586, Model 001, is an industrial Rockwell motor-related component identified with the S26 product designation. The supplied identification describes the configuration as S26-2B+R/SFT REM+MS CON 90 DEG, with part number 43-0586 and Model 001. Industrial references associate Rockwell 43-0586 with the Rockwell DC servo…

RAE Corporation 3110049 | 24VDC Low-Speed High-Torque Motor

  📌 Product Introduction The RAE Corporation 3110049 is a low-speed, high-torque DC motor designed for applications requiring controlled mechanical movement with substantial output torque. The available product listing identifies the unit as a 24 VDC motor rated at 9 RPM, 2.36 A, with a torque rating of 215 in-lb. The motor is classified as…

WOODWARD 8408-0920C/3174664 | Ignition Controller

  ⚙️ Product Introduction The WOODWARD 8408-0920C, also identified as 3174664, is an industrial ignition controller intended for engine and generator control applications. The available product listing identifies the unit as a Woodward Ignition Controller with MPN 8408-0920C. This type of controller is used within an engine ignition system to manage the ignition sequence and…

MAK 1.00.7-36.21.00-51 | PCB Card Rack

  ⚙️ Product Introduction The MAK 1.00.7-36.21.00-51 is a PCB card rack / circuit control panel used in MAK marine engine automation equipment. Available equipment listings identify this drawing number with MAK rack and PCB assemblies, including the 9.01.7-93.11.00-03 module rack platform. The supplied unit is specifically described as a PCB Card Rack with no…