Woodward CPC-II 9907-1106 | Current-to-Pressure Converter

kucun

The Woodward 9907-1106 CPC-II (Current-to-Pressure Converter, Generation II) is a high-precision, electrohydraulic pressure-regulating valve control designed for positioning single-acting steam turbine valve servos. By converting an isolated 4–20 mA electrical demand signal into a highly stable and proportional hydraulic output pressure, it enables exceptionally accurate speed and load regulation while minimizing mechanical wear across the…

ABB 3HNA001625-001/01 | IRB Robot Control Unit PCB

ABB

The ABB 3HNA001625-001/01 is an original main control unit printed circuit board (PCB) designed for ABB IRB industrial robotic arms. Functioning within the S4C, S4C+, or IRC5 controller generations (depending on the specific cabinet sub-architecture), this motherboard coordinates the central processor functions, path planning calculations, and real-time synchronization between the teach pendant and the drive…

ABB 3BHB002751R0106 | ACS1000 Rectifier Supervision Board

ABB

The ABB 3BHB002751R0106 is a specialized Rectifier Supervision Board designed specifically for the ACS1000 series of Medium Voltage (MV) AC drives. This board plays a critical role in monitoring and protecting the input rectifier stage of the drive, whether it is an air-cooled (A) or water-cooled (W) variant. Its primary function is to supervise the…

Metso Valmet Automation VPU A413313 | Valve Processing Unit

kucun

The Metso Valmet A413313 is a high-performance Valve Processing Unit (VPU) designed for the Valmet DNA (formerly Metso DNA) automation system. It acts as a deterministic, real-time interface between intelligent field devices (such as valve networks) and the Distributed Control System (DCS). Engineered for the rigorous demands of the power, petrochemical, and pulp and paper…

GE DS200SIOCG1A | VME Instantaneous Overcurrent Board

GE

The GE DS200SIOCG1A is a VersaModular Eurocard (VME) Standard Input/Output Board manufactured by General Electric for the Mark V Speedtronic™ turbine control series. Functioning primarily as an Instantaneous Overcurrent Board (SIOC), this module is a critical high-integrity protection device. It is designed to continuously monitor circuit currents against pre-set industrial thresholds, immediately sending a trip…

ABB PM511V08 | 3BSE011180R1 Versatile Interface Card

ABB

The ABB PM511V08 (Part Number 3BSE011180R1) is a high-performance, versatile processor and interface card utilized within ABB’s specialized industrial control systems, most notably the Advant Controller 400 (AC400) series and related Advant OCS platforms. Acting as a central processing or communication node, the PM511V08 executes complex control logic, manages system diagnostics, and facilitates rapid data…

IS200TBAIH1C | GE Mark VI Analog Input Terminal Board

GE

The IS200TBAIH1C is an Analog Input Terminal Board (TBAI) developed by General Electric as part of the Speedtronic Mark VI turbine control system. This block acts as the physical landing point for field wiring, receiving low-level analog signals from various transmitters and routing them to the internal I/O processors (such as the VAIX or VAIC…

HIMA F6214 | Safety-Related 4-Channel Analog Input Module

HIMA

The HIMA F6214 is a safety-related, 4-fold analog input module designed for high-integrity industrial automation. It is part of the HIQuad (H41q/H51q) system family and is certified for use in safety-critical applications requiring compliance with SIL 3 (IEC 61508) or Requirement Class AK 1–6. This module is a legacy staple in the process industry, known…

GE IS200DSPXH1D | Drive Digital Signal Processor Board

GE

The GE IS200DSPXH1D is a high-performance Digital Signal Processor Control Board (DSPX) engineered for GE Innovation Series Drives and the EX2100 / EX2100e Excitation Control Systems. Functioning as the core controller for power electronics, this module manages complex processing, bridge logic, motor regulation, and gating operations. +1 The “H1D” variation features a robust conformal coating,…