The Bosch Rexroth Indramat DKR02.1-W300B-BE12-01-FW is a high-power DIAX03 drive controller designed for industrial main-drive and servo applications requiring substantial motor power and precise motion control. This package is listed with a DSS02.1 module, a DZF03.1 module, and FWC-DSM2.3-SHS firmware. The DKR02.1-W300B controller has a nominal current class of approximately 300 A and operates from a three-phase 400–480 V AC supply. It uses a built-in blower for air cooling, an integrated bleeder configuration, and a SERCOS command interface. The controller supports compatible digital servo and resolver feedback configurations. The SHS firmware designation relates to the DIAX03 drive with main spindle functionality. This equipment is intended for demanding applications such as machine tools, CNC main spindles, and industrial production machinery. Before installation, verify the complete controller configuration, plug-in module positions, firmware version, motor feedback type, SERCOS communication setup, and compatibility with the existing machine control system.

📋 Product Specifications
| Parameter | Description |
|---|---|
| Brand | Bosch Rexroth / Indramat |
| Main Model | DKR02.1-W300B-BE12-01-FW |
| Material Number | R911281177 |
| Product Series | DIAX03 / DKR02 |
| Product Type | High-Power Drive Controller |
| Package Components | DKR02.1-W300B-BE12-01-FW, DSS02.1, DZF03.1, FWC-DSM2.3-SHS |
| Firmware Family | DIAX03 SHS |
| Firmware Version | Verify exact installed version; 02VRS documentation reference |
| Nominal Current Class | Approx. 300 A |
| Power Supply | 3-phase 400–480 V AC |
| Supply Frequency | 50/60 Hz |
| Continuous Current at 4 kHz | 141 A |
| Continuous Current at 8 kHz | 110 A |
| Continuous Regenerated Power | Approx. 43 kW |
| Peak Current | Verify operating conditions and configuration |
| Command Interface | SERCOS |
| Motor Feedback | Digital servo and resolver, depending on configuration |
| Cooling Method | Air cooling with built-in blower |
| Braking Configuration | Integrated bleeder |
| Protection Rating | IP20 |
| Maximum Operating Temperature | Up to 55°C under specified conditions |
| Maximum Installation Elevation | 1,000 m without additional derating |
| Storage / Transport Temperature | -30 to +80°C |
| Dimensions | Approx. 1,000 × 440 × 290 mm (H × W × D); verify actual assembly |
| Weight | Approx. 104 kg for the drive controller; package weight may differ |
| Place of Manufacture | Not confirmed |
| Country of Origin | Verify product nameplate |
| Product Status | Legacy industrial drive equipment |
| Discontinued | Current lifecycle status not confirmed |
| Application | CNC main spindle and industrial servo drive systems |
⚙️ Installation and Operation
- Installation: Isolate the three-phase power supply and verify DC bus discharge before handling the controller. Check the mounting structure, grounding, power terminals, motor connections, and cooling clearance. Inspect the DSS02.1 and DZF03.1 modules and confirm their correct positions against the configuration documentation.
- Power-On: Verify the 400–480 V AC supply, control voltage, motor wiring, and SERCOS connections. Confirm that the installed firmware and plug-in modules match the controller configuration before enabling the drive.
- Normal Operation: Monitor drive status, motor current, spindle speed, temperature, cooling fan operation, and SERCOS communication. Check diagnostic messages from the drive and machine controller during operation.
- Parameter and Firmware Configuration: Use the appropriate Bosch Rexroth Indramat DIAX03 commissioning documentation and compatible configuration tools. Verify motor data, feedback settings, spindle parameters, operating limits, and firmware identification. Back up existing parameters before making changes. Do not replace or update the SHS firmware without confirming compatibility.
- Power-Off: Stop the spindle and controlled axes using the approved machine shutdown procedure. Disable the drive, isolate the mains supply, and observe the OEM DC bus discharge procedure before servicing or removing plug-in modules.
🔧 Maintenance and Troubleshooting
- Controller fails to start: Check the incoming three-phase supply, control voltage, fuses, connections, and controller diagnostic indicators.
- SERCOS communication fault: Inspect fiber-optic connections, communication topology, interface configuration, and controller compatibility.
- Motor feedback error: Verify digital servo or resolver wiring, feedback type, connectors, and motor configuration.
- Overtemperature alarm: Inspect the built-in blower, ventilation openings, cabinet airflow, and ambient temperature.
- Bleeder or DC bus fault: Check the braking circuit, regenerative loading, DC bus connections, and associated diagnostics.
- Firmware configuration error: Confirm the FWC-DSM2.3-SHS version and compatibility with the DKR controller and machine application.
- Unexpected spindle behavior: Check motor parameters, feedback signals, drive limits, and CNC control commands.
- Intermittent operation: Inspect power terminals, grounding, plug-in module seating, and signs of overheating.
🛡️ Safety Precautions
- Installation and commissioning must be performed by qualified industrial drive-system personnel.
- The controller contains hazardous AC and DC bus voltages. Isolate power and verify discharge before servicing.
- Do not remove or insert plug-in modules while the controller is energized.
- Never disconnect motor cables or feedback connections during operation.
- Ensure the heavy controller is lifted and mounted using suitable handling equipment.
- Maintain the specified ventilation clearance and cooling conditions.
- Verify firmware, motor feedback, SERCOS configuration, and module arrangement before commissioning.
- Test spindle control, emergency-stop circuits, and machine safety functions before returning the equipment to production.
🔗 Related Bosch Rexroth Indramat Models
The following are related DKR drive controllers and DIAX03 drive-system models. They are reference products, not confirmed direct replacements for the complete DKR02.1-W300B-BE12-01-FW package.
- Bosch Rexroth DKR02.1-W300B
- Bosch Rexroth DKR02.1-W300B-B
- Bosch Rexroth DKR02.1-W300B-BE09-01-FW
- Bosch Rexroth DKR02.1-W300B-BE11-02-FW
- Bosch Rexroth DKR02.1-W300B-BE23-01-FW
- Bosch Rexroth DKR02.1-W300B-BE24-02-FW
- Bosch Rexroth DKR02.1-W300B-BE30-01-FW
- Bosch Rexroth DKR02.1-W300B-BE32-01-FW
- Bosch Rexroth DKR02.1-W300B-BE37-01-FW
- Bosch Rexroth DKR02.1-W300B-BE41-02-FW
- Bosch Rexroth DKR02.1-W200Z-BE79-01-FW
- Bosch Rexroth DKR02.1-W200
- Bosch Rexroth DKR02.1-F200
- Bosch Rexroth DKR02.1-F300
- Bosch Rexroth DKR03.1-W300
