ABB Unitrol 6000 3ADT218440R0003 | Converter Drive UNS 5907 A V5082

🔧 Product Overview The ABB Unitrol 6000 3ADT218440R0003 is a converter drive assembly identified as UNS 5907 A V5082. It belongs to the ABB Unitrol 6000 platform and is intended for industrial power-control and excitation-system applications. The exact assembly carries several identification references, including 3ADT218440R0003, UNS 5907 A V5082, 3BHS227496E01, and 3BHE032284 E01. Additional markings…

PRO-FACE 3620003-05 | Operator Interface Monitor 3582302-01

Product Overview The PRO-FACE 3620003-05 is a front display and operator interface unit used with the Pro-face PL3000 series industrial computer platform. It is identified as a 15-inch LCD front display with keypad, while 3582302-01 is the associated built-in computer unit. Pro-face documentation lists the combination of 3582302-01 with front module 3620003-05 for the APL3700-KA…

AUTRONICA KM-2 Alarm And Monitoring System KMB-201/F, KME-200/T, 7251-008.0003

📌 Product Overview The AUTRONICA KM-2 is a marine alarm and monitoring system designed for monitoring operating conditions and alarm signals in shipboard and industrial applications. The listed configuration includes KMB-201/F, KME-200/T, and associated KM-2 system components under reference 7251-008.0003. The KM-2 system is associated with Autronica / J.I. Jenssen marine monitoring equipment and is…

SUPCON FW221 Webfield I/O Base PCB Rack Module 208000960LER436AA, 2080008U0

🔧 Product Overview The SUPCON FW221 is a Webfield I/O Base PCB Rack Module used as part of a SUPCON industrial automation I/O architecture. The module provides the physical PCB/rack interface for associated Webfield I/O electronics and is identified by multiple board and assembly numbers. The listed unit carries the FW221 designation together with 208000960LER436AA…

REXROTH SB356 R911172925| 3-Phase Multi-Channel Controller 3000W

🔹 Product Overview The REXROTH SB356 is a Bosch Rexroth 3-phase multi-channel controller system used with the VM350, LTS350D, SE352 and KE350 control components. The assembly combines power electronics, control electronics and communication-related modules in a single industrial system configuration. The SB356 power section is marked for AC 3 × 380–500 V input and 3000…

B&R 8V1640.001-2 | ACOPOS 1640 Servo Drive

Product Overview The B&R 8V1640.001-2 is an ACOPOS 1640 servo drive designed for industrial motion-control applications. It accepts a three-phase 400–480 VAC supply and supports 50/60 Hz operation. The unit has a maximum installed load of 54 kVA and includes an integrated line filter, DC bus power supply, braking resistor, and electronic safe restart inhibit.…

ABB REB670 SR91C790 | Busbar Protection Relay

🔧 Product Overview The ABB REB670 is a high-performance busbar protection relay designed for fast and selective protection of medium- to extra-high-voltage busbar systems. It is part of ABB’s Relion 670 series and is intended for applications where dependable fault detection and rapid fault clearance are essential. The listed unit is configured as a REB670…

GENERAL ELECTRIC 446W0696P001 | DC Pitch Converter

🔧 Product Overview The GENERAL ELECTRIC 446W0696P001 is a DC Pitch Converter identified by the JPC1712151 designation and designed for 20 Nm DC pitch motor applications. It is a power conversion unit used in wind-turbine pitch control systems, where controlled DC power is required to adjust and position the turbine blades. The unit combines a…

TERASAKI ELECTRIC XS1600NE | 1600A 3-Pole Circuit Breaker

🔹 Product Overview The TERASAKI ELECTRIC XS1600NE is a high-current molded case circuit breaker from the Terasaki TemBreak XS series. It is designed for large low-voltage power distribution and protection applications where reliable circuit interruption and adjustable overcurrent protection are required. The XS1600NE is a 1600A-frame breaker and is listed by Terasaki as part of…