Schneider Electric Pacis C264 | Modular and Compact Substation Controller | Bay Control & Automation Unit

Technical Parameters Model Number: Pacis C264 Manufacturer: Schneider Electric Processor: 32-bit High-Performance Microprocessor Communication Protocols: IEC 61850 (Ed. 1 & 2), IEC 60870-5-101/103/104, DNP3, Modbus I/O Capacity: Scalable modular design (Digital I/O, Analog I/O, CT/VT inputs) Redundancy: Supports PRP (Parallel Redundancy Protocol) and HSR (High-availability Seamless Redundancy) Synchronization: IRIG-B, SNTP, or IEEE 1588 (PTP) Power…

ABB KU C321 AE | Excitation System Control Module

Product Parameters Model Number: KU C321 AE Product ID: HIEE300698R0001 System Series: UNITROL / MEGATROL Excitation Systems Module Type: Control and Logic Processing Unit Input Voltage: 24V DC (Internal system power) Communication: High-speed proprietary internal bus Microprocessor: Integrated high-performance digital controller Operating Temperature: -5°C to +55°C Redundancy Support: Compatible with dual-channel redundant configurations Product Description…

Kollmorgen Servostar 614-AS S61401 Servo Drive

Product Parameters Model Number: S61401-AS (Servostar 614) Manufacturer: Kollmorgen Rated Output Current: 14 Amps (Continuous) Peak Output Current: 28 Amps (For approx. 5 seconds) Input Voltage: 230V to 480V AC (3-Phase) Rated Output Power: 10 kVA Feedback Support: Resolver, Encoder, ComCoder, Hall sensors Interface: RS232 (Standard), Option for CANopen, PROFIBUS, or SERCOS Product Description The…

YOKOGAWA NFAI143-H50 S1 Analog Input Module

Product Parameters Model Number: NFAI143-H50 S1 Suffix Codes: H (With HART Communication), 5 (High-density), 0 (Standard type) Input Channels: 16-Channel, Isolated Signal Type: 4 to 20 mA DC System Compatibility: CENTUM VP / CENTUM CS 3000 R3 HART Support: HART 5/6/7 Variable Pass-through Accuracy: ±0.1% of span Input Impedance: 250 Ω (During 4-20mA input) Product…

AMETEK DDN-T1392-010 | Program Control Module | Industrial Control Unit

Technical Parameters Part Number: DDN-T1392-010 Manufacturer: AMETEK (Programmable Power / Precision Instruments) Function: Program Control / Logic Interface Voltage Supply: 24 VDC Nominal Communication Port: Dedicated Serial / Parallel Interface (Model dependent) Input Type: Digital Logic Inputs Control Architecture: Microprocessor-based Programmable Logic   Product Description The AMETEK DDN-T1392-010 is a specialized program control module engineered…

Honeywell 51402089-100 | EPDG2 Enhanced Video Board

Product Parameters Model Number: 51402089-100 Series: TDC 3000 / Experion PKS Board Type: EPDG2 (Enhanced Programmable Display Generator) Compatibility: Universal Station (US) / Global User Station (GUS) Bus Interface: High-speed proprietary backplane Video Output: High-resolution graphics processing Power Consumption: 15W @ 5V DC (Typical) Operating Temperature: 0°C to +55°C Product Description The Honeywell 51402089-100 is…

Cummins Onan Generator Control Assembly 0300-6396

Product Parameters Model Number: 0300-6396 Manufacturer: Cummins Onan Compatible Series: Quiet Diesel (QD) Series, Marine, and RV Generators Control Type: Integrated Digital Control Module Input Voltage: 12 Vdc (Standard Chassis Power) Connectivity: Multi-pin harness connector for engine and alternator sensors Functions: Start/Stop control, safety shutdowns, and diagnostic monitoring Enclosure: Sealed potting for moisture and vibration…

GE CK12BE300 | 3-Pole Industrial Contactor | CK12BE311N High-Power Switching Unit

Technical Parameters Model Number: CK12BE300 (CK12BE311N) Manufacturer: General Electric (GE) / ABB Power Rating (AC3): 375 kW @ 380-400V Coil Voltage: 220-250V AC/DC (Electronic Coil Control) Rated Operational Current (Ie): Approx. 630A – 700A (Application dependent) Pole Configuration: 3-Pole (3NO) Auxiliary Contacts: 1NO + 1NC (Standard configuration) Frequency: 50/60 Hz   Product Description The GE…

Woodward 8200-226 | High-Precision Servo Position Controller

Product Parameters Model Number: 8200-226 Series: SPC (Servo Position Controller) Input Power: 18–32 VDC (24 VDC Nominal) Analog Inputs: 4–20 mA or 0–5 VDC position demand Output Drive: Integrated driver for proportional hydraulic/pneumatic actuators Communication Interface: RS-232 for service/configuration; DeviceNet or CANopen (specific to revision) Resolution: 16-bit Analog-to-Digital conversion Operating Temperature: -40°C to +85°C Product…