1. Product Description
The B&R 8LSA43.ee045ffgg-3 is a three-phase synchronous servo motor from the 8LS series, designed for precision motion control in industrial automation and machinery. It features a compact size-4 motor construction, flange mounting, natural cooling, and an integrated digital encoder configuration. With a nominal speed of 4,500 rpm, nominal torque of 2.7 Nm, and nominal power of 1,272 W, it is suitable for dynamic positioning and controlled rotary motion in compatible B&R ACOPOS drive systems. The manufacturer’s product data also identifies a holding-brake configuration with 8 Nm holding torque for this catalog designation. The motor can be used in packaging equipment, machine tools, automated assembly systems, and other applications requiring accurate servo positioning. The eBay listing also references 8LSA43.EB045D000-3; this designation must be checked against the actual nameplate because its equivalence to 8LSA43.ee045ffgg-3 has not been established. Confirm the encoder, brake, shaft, connector, and cable configuration before ordering a replacement.

2. Key Technical Specifications
- Brand: B&R Industrial Automation
- Product Series: 8LS Synchronous Motors
- Motor Model: 8LSA43.ee045ffgg-3
- Additional Listing Designation: 8LSA43.EB045D000-3 (not confirmed as equivalent)
- Motor Type: Three-phase permanent-magnet synchronous servo motor
- Frame / Size: 8LSA4, size 4
- Nominal Speed: 4,500 rpm
- Number of Pole Pairs: 5
- Nominal Torque: 2.7 Nm
- Nominal Power: 1,272 W
- Nominal Current: 2.5 A
- Stall Torque: 4.0 Nm
- Stall Current: 3.7 A
- Maximum Torque: 15.2 Nm
- Maximum Current: 21.9 A
- Maximum Speed: 12,000 rpm
- Torque Constant: 1.08 Nm/A
- Voltage Constant: 64.93 V/1,000 rpm
- Stator Resistance (two-phase): 2.64 Ω
- Stator Inductance (two-phase): 16.5 mH
- Electrical Time Constant: 6.3 ms
- Thermal Time Constant: 25 minutes
- Rotor Moment of Inertia: 1.87 kg·cm²
- Weight Without Brake: 4.5 kg
- Holding Brake Torque: 8 Nm for the official ee045ffgg-3 catalog configuration
- Cooling: Natural cooling
- Protection Rating: IP65, subject to the specified installation and connector conditions
- Mounting: Flange-mounted
- Compatible Drive Families: B&R ACOPOS, ACOPOSmulti, and ACOPOS P3, subject to drive sizing and configuration
3. Application Scenarios
- CNC Machine Tools: Servo-axis positioning, rotary movement, and controlled feed applications.
- Packaging Machinery: Synchronized movement in filling, sealing, labeling, and packaging equipment.
- Automated Assembly: Accurate positioning and repeatable motion in assembly stations.
- Material Handling: Servo-driven transfer mechanisms, indexing units, and conveyor positioning.
- Printing and Converting: Controlled rotary motion and coordinated machine-axis operation.
- Pick-and-Place Equipment: Dynamic movement for automated handling and positioning.
- Industrial Production Lines: Integration into machinery using compatible B&R motion-control systems.
4. Installation and Commissioning Procedure
- Record the complete motor type code, serial number, material identification, and nameplate data.
- Resolve the designation difference between 8LSA43.EB045D000-3 and 8LSA43.ee045ffgg-3 before selecting the replacement.
- Confirm the compatible ACOPOS drive model and verify its current, voltage, speed, and power ratings.
- Check the encoder type and feedback interface against the drive configuration.
- Verify whether the installed motor has a holding brake and confirm its electrical release requirements.
- Isolate the drive system and follow lockout/tagout and DC bus discharge procedures.
- Inspect the motor shaft, mounting flange, connectors, and housing for damage.
- Install the motor using the specified mounting hardware and alignment procedure.
- Connect the motor power and encoder cables using the correct B&R cable assemblies and pin assignments.
- Configure the motor identification and feedback parameters in the approved B&R engineering environment.
- Test encoder feedback, brake operation, direction of rotation, and drive diagnostics.
- Perform a controlled low-speed test before commissioning the motor under its normal machine load.
5. Configuration and Operating Guidelines
- Match the complete motor designation to the configured drive motor data.
- Verify nominal speed, current, torque, and maximum speed limits before operation.
- Confirm the encoder configuration and feedback cable compatibility.
- Check the holding-brake option and configure its release and engagement sequence correctly.
- Select the ACOPOS drive according to the manufacturer’s motor-drive recommendations.
- Use appropriate motor cable cross-sections and connector sizes as specified in B&R documentation.
- Maintain correct protective earth and cable shielding.
- Avoid operating above the motor’s specified thermal and mechanical limits.
- Back up drive parameters before replacing the motor or modifying the motion-control configuration.
6. Daily Maintenance
- Inspect the motor housing and mounting flange for mechanical damage.
- Check shaft alignment, coupling condition, and abnormal vibration.
- Inspect power and encoder connectors for looseness or contamination.
- Monitor motor temperature and drive diagnostic messages.
- Check the brake function according to the manufacturer’s maintenance instructions.
- Keep the motor surface clean and free from excessive dust or oil deposits.
- Inspect cable routing for abrasion, bending stress, and connector strain.
- Record operating hours, abnormal noise, temperature changes, and maintenance actions.
- Maintain a backup of motor and drive configuration data.
7. Troubleshooting and FAQ
Q1: The motor does not rotate after installation.
A: Check drive enable conditions, motor power wiring, encoder feedback, safety interlocks, and motor identification parameters. Review the drive diagnostic messages before replacing components.
Q2: The drive reports an encoder fault.
A: Inspect the feedback cable, connectors, shielding, and encoder configuration. Confirm that the installed motor designation matches the drive parameters.
Q3: The motor overheats during operation.
A: Check the mechanical load, operating duty, current, ambient conditions, and cooling clearances. Compare operating values with the manufacturer’s motor data.
Q4: The holding brake does not release.
A: Verify the brake supply, control wiring, and release sequence. Confirm the exact brake option from the motor nameplate and do not apply an assumed voltage.
Q5: Can this motor operate with an ACOPOSmulti drive?
A: B&R’s official catalog lists ACOPOSmulti drive recommendations for the ee045ffgg-3 motor configuration. The exact drive selection must still be checked against the application load and drive sizing data.
Q6: Is 8LSA43.EB045D000-3 identical to 8LSA43.ee045ffgg-3?
A: This equivalence has not been verified. Compare the full nameplate designation, encoder code, brake option, shaft configuration, and connector arrangement before ordering.
Q7: Can another 8LSA43 motor replace this model?
A: Not automatically. Different nominal speeds and option codes can change torque, current, encoder, brake, and mechanical characteristics. Verify the complete type code before substitution.
8. Safety Precautions
- Installation and commissioning must be performed by qualified servo-drive personnel.
- Isolate the drive and motor circuits before servicing.
- Follow the manufacturer’s DC bus discharge procedure and verify safe voltage conditions.
- Secure the driven machine before releasing or testing the holding brake.
- Do not use the holding brake as a dynamic emergency stopping device unless explicitly permitted by the machine design and manufacturer.
- Do not exceed the motor’s rated speed, current, torque, or thermal limits.
- Maintain protective earth and correct cable shielding.
- Do not operate a motor with damaged connectors or exposed electrical conductors.
- Validate the complete motion-control system after motor replacement or parameter changes.
9. Related B&R Models and Motor Configurations
The following models are related 8LS synchronous motors listed in B&R’s product catalog. They are useful for identification and sourcing but are not automatically interchangeable with the 8LSA43.ee045ffgg-3.
- 8LSA43.ee030ffgg-3 – Size-4 motor, 3,000 rpm configuration.
- 8LSA43.ee045ffgg-3 – Size-4 motor, 4,500 rpm configuration.
- 8LSA43.ee060ffgg-3 – Size-4 motor, 6,000 rpm configuration.
- 8LSA44.ee022ffgg-3 – Size-4 motor, 2,200 rpm configuration.
- 8LSA44.ee030ffgg-3 – Size-4 motor, 3,000 rpm configuration.
- 8LSA44.ee045ffgg-3 – Size-4 motor, 4,500 rpm configuration.
- 8LSA44.ee060ffgg-3 – Size-4 motor, 6,000 rpm configuration.
- 8LSA45.ee030ffgg-3 – Size-4 motor, 3,000 rpm configuration.
- 8LSA45.ee045ffgg-3 – Size-4 motor, 4,500 rpm configuration.
- 8LSA45.ee060ffgg-3 – Size-4 motor, 6,000 rpm configuration.
- 8LSA46.ee022ffgg-3 – Size-4 motor, 2,200 rpm configuration.
- 8LSA46.ee030ffgg-3 – Size-4 motor, 3,000 rpm configuration.
- 8LSA46.ee045ffgg-3 – Size-4 motor, 4,500 rpm configuration.
- 8LSA46.ee060ffgg-3 – Size-4 motor, 6,000 rpm configuration.
- 8LSA43.ee022ffgg-3 – Size-4 motor, 2,200 rpm configuration.
Always verify the complete motor designation, encoder option, brake, shaft, connector, and drive compatibility before selecting a related model as a replacement.
