The B&R Automation ACOPOS P3 8EI8X8HWT10.0700-1 is a high-performance three-axis servo drive designed for coordinated motion control in industrial automation systems. It supports three motor connections, each rated for 4 kW continuous power and 8.8 A continuous current, with a peak current of 24 A per axis under specified operating conditions. The unit accepts three-phase 200–480 V AC input and includes an integrated braking resistor, three EnDat 2.2 digital encoder interfaces, motor holding-brake connections, and configurable switching frequencies of 5, 10, or 20 kHz. Its compact wall-mounted design supports multi-axis machine applications such as packaging, material handling, machine tools, and automated production equipment. The drive also provides overload, short-circuit, and ground-fault protection. Before installation, verify motor and encoder compatibility, DC-bus configuration, braking requirements, control-system integration, and the required B&R ACP10 software version.

📋 Product Specifications
| Parameter | Description |
|---|---|
| Brand | B&R Automation |
| Model | 8EI8X8HWT10.0700-1 |
| Product Series | ACOPOS P3 |
| Product Type | Three-Axis Servo Drive / Servo Amplifier |
| Axis Configuration | 3 motor axes |
| Mains Input Voltage | 3 × 200–480 V AC ±10% |
| Input Frequency | 50/60 Hz ±4% |
| Maximum Installed Load | 10 kVA |
| Continuous Power per Axis | 4 kW |
| Continuous Current per Axis | 8.8 A RMS |
| Peak Current per Axis | 24 A RMS |
| Peak Power Output | 10 kW |
| Nominal Switching Frequency | 5 kHz |
| Available Switching Frequencies | 5 / 10 / 20 kHz |
| Maximum Output Frequency | 598 Hz |
| Control Supply | 24 V DC ±25% |
| Control Supply Current | 1.2 A plus motor holding-brake current |
| Encoder Interfaces | 3 × EnDat 2.2 |
| Encoder Signal Transmission | RS485, 6.25 Mbit/s |
| Maximum Encoder Cable Length | 100 m, subject to cable specifications |
| Motor Holding-Brake Outputs | 3 |
| Continuous Brake Output Current | 1.3 A per connection |
| Integrated Braking Resistor | Yes |
| Internal Braking Resistor | 150 W continuous, 7 kW peak |
| External Braking Resistor Capability | 2 kW continuous, 25 kW peak |
| Minimum External Braking Resistance | 25 Ω |
| Cooling | Verify installation and ventilation requirements in OEM manual |
| Mounting | Wall mounting |
| Protection Rating | IP20 |
| Operating Temperature | 5–40°C nominal; maximum 55°C subject to derating |
| Dimensions | 66 × 374 × 258.5 mm (W × H × D) |
| Weight | Approx. 4 kg |
| Place of Manufacture | Not confirmed |
| Country of Origin | Verify product nameplate |
| Product Status | ACOPOS P3 product family |
| Discontinued | Not confirmed |
| Engineering Software | B&R Automation Studio / ACP10, version compatibility required |
⚙️ Installation and Operation
- Installation: Disconnect the mains and verify DC-bus discharge before installation. Mount the drive vertically in the approved wall-mounted arrangement. Check grounding, mains connections, motor cables, encoder connectors, braking resistor wiring, and cabinet ventilation.
- Power-On: Verify the three-phase supply voltage and separate 24 V DC control supply. Check the control wiring, motor connections, and enable circuit before energizing the drive. Follow the OEM startup sequence and observe the controller diagnostics.
- Normal Operation: Monitor all three motor axes independently. Check motor current, encoder feedback, drive temperature, braking behavior, and fault messages. Confirm that each axis follows its commanded motion profile.
- Parameter Configuration: Use compatible B&R Automation Studio and ACP10 software. Configure motor data, encoder type, switching frequency, axis parameters, current limits, and braking settings according to the connected equipment. Back up the original configuration before making changes.
- Power-Off: Stop all three axes using the approved machine shutdown sequence. Disable the drive, isolate the mains and 24 V DC supplies as required, and observe the specified DC-bus discharge waiting time before servicing.
🔧 Maintenance and Troubleshooting
- Drive does not enable: Check the mains supply, 24 V DC control supply, enable inputs, and system interlocks.
- Overcurrent fault: Inspect motor cables, motor insulation, mechanical loading, and configured current limits.
- Encoder feedback error: Check EnDat 2.2 wiring, connector seating, encoder supply, and motor feedback configuration.
- Overtemperature alarm: Inspect cabinet airflow, mounting orientation, ambient temperature, and installation clearances.
- Braking fault: Check braking resistor wiring, resistance, thermal condition, and configured braking parameters.
- Axis communication or configuration error: Verify the Automation Studio project, ACP10 version, axis assignment, and firmware compatibility.
- Intermittent motor operation: Inspect grounding, cable shielding, connectors, and electrical interference.
🛡️ Safety Precautions
- Installation and commissioning must be performed by qualified industrial drive-system personnel.
- High-voltage AC and DC-bus circuits can retain dangerous electrical energy after power-off.
- Observe the OEM discharge waiting time and verify the DC-bus voltage before servicing.
- Never disconnect motor or encoder cables while the drive is energized.
- Confirm motor ratings, encoder compatibility, braking resistor specifications, and cable lengths before commissioning.
- Maintain the specified mounting orientation and cabinet cooling conditions.
- Verify emergency-stop circuits and machine safety functions independently of normal drive control.
- Perform a controlled commissioning test before returning the equipment to production.
🔗 Related B&R Models
The following B&R models belong to related ACOPOS P3 servo-drive and motion-control product families. They are reference models, not guaranteed direct replacements for 8EI8X8HWT10.0700-1.
- B&R 8EI8X8HWT10.XXXX-1
- B&R 8EI8X8HWS10.0700-1
- B&R 8EI8X8HWT20.0700-1
- B&R 8EI8X8HWT30.0700-1
- B&R 8EI8X8HWT10.0500-1
- B&R 8EI8X8HWT10.0900-1
- B&R 8EI8X8HWT10.1100-1
- B&R 8EI8X8HWT10.1300-1
- B&R 8EI8X8HWT10.1500-1
- B&R 8EI8X8HWS10.XXXX-1
- B&R 8EI8X8HWS20.0700-1
- B&R 8EI8X8HWS30.0700-1
- B&R 8EI4X5HWS10.XXXX-1
- B&R 8EI4X5HWT10.XXXX-1
- B&R 8EI8X8HWT20.XXXX-1
